BS +AU 148-10-1969 PDF

BS +AU 148-10-1969 PDF

Methods of test for motor vehicle paints-Resistance to heat and corrosion

$90.17 $180.34 -50%
Publisher
isbn 0580053083
Product Code: BS +AU 148-10
Stock In Stock
Published: 03/31/1969
Number of Pages: 6
File Size: 1 file, 220 KB

Available Options

Product Description

Methods of test for motor vehicle paints-Resistance to heat and corrosion

Scope: This Part of this British Standard describes a method to be used for the evaluation of the resistance of paints applied to a combination of heat and corrosion, e.g. as applied to exhaust/silencer assemblies. 2 Preparation of test panels 2.1 Panels, 150 mm × 100 mm, or other convenient size specified and pretreated in accordance with the requirements of BS 3900, Part A32) (note particularly Clause 2.2) shall be coated in accordance with the requirements of BS 3900, Part 42) with the paint system to be tested. 2.2 Panels shall be aged under normal laboratory conditions for 24 h before testing, unless otherwise agreed. 3 Test method 3.1 The test panel shall be subjected to 3 cycles of test each consisting of: 1) 8 h exposure to a temperature of 200 ± 5 °C in an air circulating oven. Temperatures in excess of 200 °C may be used, by arrangement between the purchaser and the supplier. 2) Cooling to room temperature. 3) 16 h exposure to 5 % salt spray in accordance with Part 173). 3.2 On completion of the 3 cycles the test panel shall be examined for evidence of blistering, flaking, loss of adhesion sod presence of corrosion. 2) BS 3900, Part A3, “Preparation of panels prior to painting”. Part A4, “Notes for guidance on paint application”. 3) BS AU 148, Part 17, “Salt spray”.

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS +AU 148-10-1969 PDF

BS +AU 148-10-1969 PDF

$90.17 $180.34