BS +AU 148-13-1969 PDF

BS +AU 148-13-1969 PDF

Methods of test for motor vehicle paints-Resistance to deterioration by contact with other materials

$90.17 $180.34 -50%
Publisher
isbn 0580053385
Product Code: BS +AU 148-13
Stock In Stock
Published: 03/31/1969
Number of Pages: 10
File Size: 1 file, 250 KB

Available Options

Product Description

Methods of test for motor vehicle paints-Resistance to deterioration by contact with other materials

Scope: This Part of this British Standard describes methods for the evaluation of the resistance to deterioration of paint systems by contact with fuels, oils, greases, battery acid, rubbers, plastics adhesives, and other agents liable to stain or damage the finish. 2 Preparation of test panels 2.1 Panels 150 mm × 100 mm or other convenient size (e.g. 150 mm × 50 mm for immersion tests) specified and pretreated in accordance with the requirements of BS 3900-A32) (note particularly Clause 2.2) shall be coated in accordance with the requirements of BS 3900-A42) with the paint system to be tested. Normally, steel panels are used, but it may be appropriate to use other substrates. 2.2 Panels shall be aged under normal laboratory conditions, for 7 days before testing, unless otherwise agreed. 3 Immersion tests 3.1 Test A. Test A is suitable for paints for exterior of engines, etc. 3.1.1 Test fluid. The test fluid shall be as agreed between the purchaser and the supplier, and shall normally be a commercially available oil. 3.1.2 Test conditions. The test conditions shall comprise immersion at 60 ± 2 °C for 2 h or other period by agreement between the purchaser and the supplier. 3.1.3 Procedure. A scratch 0.6 mm wide shall be made through the paint film along the centre of the length of the panel and terminating approximately 25 mm from each edge. The panel shall be immersed for 50–75 mm of its length in the test liquid for the required time and at the specified temperature. At the end of this time the panel shall be removed from the liquid and wiped dry with cleaning tissue or lint free cloth. The paint film shall be examined, immediately, for any signs of deterioration. The examination shall be repeated after 1 h and any change noted. 3.1.4 Assessment of results. Any swelling, loss of gloss, softening, colour change, staining or other deterioration before and after polishing (if applicable) shall be recorded. The acceptable degree of change shall be the subject of agreement bet

Contents:

  • Foreword
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS +AU 148-13-1969 PDF

BS +AU 148-13-1969 PDF

$90.17 $180.34