BS PD ISO/TR 18336-2016 PDF

BS PD ISO/TR 18336-2016 PDF

Guidelines for good XRF laboratory practice for the iron ore industry

$172.72 $345.44 -50%
Publisher
isbn 9780580795343
Product Code: BS PD ISO/TR 18336
Stock In Stock
Published: 02/29/2016
Number of Pages: 38
File Size: 1 file, 1.3 MB

Available Options

Product Description

Guidelines for good XRF laboratory practice for the iron ore industry

Scope: This Technical Report specifies recommended quality control procedures for XRF laboratories operating within the iron ore industry. 2 Reagents All reagents (including fusion fluxes and calibration reagents) should be purchased from reputable suppliers and should meet the minimum requirements for purity as listed in ISO 9516-1. All reagents should have a batch number and, where available, a certificate of analysis. Details of purchased reagents (supplier, amount purchased, quality, and batch number) should be recorded. These records should include what the reagents are used for. For batches of flux, the records should indicate which samples were analysed with a particular batch. 2.1 Fusion flux As the levels of contamination may vary from batch to batch of flux, the purity of fusion fluxes should be checked prior to use. This can be achieved by fusing duplicate beads of pure silica and iron with the new flux, and analysing these along with beads prepared using a previously tested (certified) flux. Background concentrations should not exceed 10 ppm to 20 ppm (as compared to a certified batch of flux) for each of the following oxides Mn3O4, SnO2, V2O5, Cr2O3, Co3O4, NiO, CuO, ZnO, As2O3, PbO, BaO, Na2O and Cl and the sum of the positive differences should not exceed 40 ppm to 50 ppm. The concentrations of the oxides should not exceed 0,01 % for each of the following oxides Fe2O3, SiO2, CaO, Al2O3, TiO2, MgO, K2O and P2O5, (the absolute sum of the differences should not exceed 0,02 %), while backgrounds should not differ by more than 0,01 %. Sulfur (reported as SO3) can frequently vary by 0,05 %. Where flux does not conform to specifications, a second duplicate set of beads (made with old and new flux) should be prepared by a different operator on the same day, or by the same operator on a different day. If the material fails to meet the minimum specifications, the supplier of non-conforming flux should be contacted and a replacement batch obtained and tested. Where non

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BS PD ISO/TR 18336-2016 PDF

BS PD ISO/TR 18336-2016 PDF

$172.72 $345.44