ISO 19993-2020 PDF

ISO 19993-2020 PDF

Timber structures-Glued laminated timber-Face and edge joint cleavage test

$31.50 $63.00 -50%
Product Code: ISO 19993
Stock In Stock
Edition: 2ND
Published: 04/2020
Number of Pages: 12
File Size: 1 file, 920 Bytes

Available Options

Product Description

Timber structures — Glued laminated timber — Face and edge joint cleavage test

Introduction: This document was developed by TC 165 as a factory quality assurance test to be used for structural glulam and applied to the face and edge joints of each production batch. Advisory acceptance criteria are included in Annex A so that ISO 19993 is an independent document. The test is intended for use in establishing the effectiveness of inter-laminar face and edge bond in structural glued laminated timber of each production batch. It is not intended for use in initial type testing or to establish the effectiveness inter-laminar bond brought about by major changes of a production process such as change of adhesive, cramping pressures, adhesive curing or similar where cyclic delamination or block shear is preferred. There is nothing in principle that would prevent the test method from being applied to non-structural glulam. Dry specimens are tested under ambient conditions and wet specimens are tested under ambient conditions after a vacuum-pressure soak under circumstances defined within the document. © ISO 2020 – All rights reserved

Scope: This document specifies methods of evaluating the effectiveness of glued laminated timber face and edge bonds within a manufacturing plant by cleaving of the glue line in both dry and wet conditions. It is not intended that it be used for initial type testing where cyclic delamination or block shear is preferred. It is based on the principle that, provided minimum wood failure percentages are met, then the bond strength exceeds the perpendicular to the grain tension strength of the under-lying substrate and therefore the bond is not the weak element limiting the integrity of a glulam assembly.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 19993-2020 PDF

ISO 19993-2020 PDF

$31.50 $63.00