ISO 20264-2019 PDF

ISO 20264-2019 PDF

Stationary source emissions-Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes

$113.50 $227.00 -50%
Product Code: ISO 20264
Stock In Stock
Edition: 1ST
Published: 09/2019
Number of Pages: 40
File Size: 1 file, 2 Bytes

Available Options

Product Description

Stationary source emissions — Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes

Introduction: There are various volatile organic compounds (VOCs) emitted from stationary sources where organic solvents are used for painting, printing, cleaning, degreasing and chemicals production. In order to understand how to reduce the environmental risk due to VOCs, it is necessary to measure not only the concentration of total VOCs but also the concentration of individual VOCs in waste gases. This is because individual VOCs have different potentials to form O3 and suspended particulate matter (SPM). Also, there are VOCs of high toxicity (e.g. benzene, toluene, propyl acetate, propanol, formaldehyde, some chlorinated organic compounds) of concern. Fourier Transform Infrared (FTIR) spectrometry is proposed to provide these measurements as it provides a measurement in the infrared (IR) region over a wide spectral band. Analysis of the recorded spectra enables the concentration of a wide number of compounds to be quantified simultaneously. Overlap of IR absorption features with each VOC can affect the quantification of each compound. However, by using appropriate chemometric procedures for the overlapping IR spectra of VOCs, the concentrations are quantified for the individual compounds of interest. This document specifies the measurement method for determining concentrations of individual VOCs in waste gases from non-combustion processes by using FTIR spectroscopy. vi © ISO 2019 – All rights reserved

Scope: This document specifies the use of FTIR spectrometry for determining the concentrations of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes. The method can be employed to continuously analyse sample gas which is extracted from ducts and other sources. A bag sampling method can also be applied, if the compounds do not adsorb on the bag material, and is appropriate in cases where it is difficult or impossible to obtain a direct extractive sample. The principle, sampling procedure, IR spectral measurement and analysis, calibration, handling interference, QA/QC procedures and some essential performance criteria for measurement of individual VOCs are described in this document. NOTE 1 The practical minimum detectable concentration of this method depends on the FTIR instrument (i.e. gas cell path length, resolution, instrumental noise and analytical algorithm) used, compounds, and interference specific (e.g. water and CO2).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20264-2019 PDF

ISO 20264-2019 PDF

$113.50 $227.00