ULC CAN/ULC 712.1-2024 PDF

ULC CAN/ULC 712.1-2024 PDF

Standard for Thermal Insulation – Light Density, Open Cell Spray Applied Semi-Rigid Polyurethane Foam – Material Specification

$0.50 $1.00 -50%
Product Code: ULC CAN/ULC 712.1
Stock In Stock
Edition: 4.
Published: 06/05/2024
Number of Pages: 25
File Size: 1 file, 340 KB

Available Options

Product Description

This Standard specifies the physical property requirements and test methods to determine the material properties for light density, open cell spray applied semi-rigid polyurethane foam, used as a thermal insulation for building applications, whether applied on a building site or in a prefabrication (manufacturing) facility. The spray polyurethane foam system installer site manufactures the light density, open cell spray applied semi-rigid polyurethane foam material identified by this Standard. The spray polyurethane foam system supplier produces a liquid “resin” component and supplies the corresponding polymeric isocyanate which, when mixed together on a fixed ratio basis, produce the material which results in the physical properties listed in this Standard. The Standard ULC-S712.2 includes mandatory requirements for the installation of the material as well as qualification of contractors and the qualification of installers and forms an integral part of the manufacturing process for the finished material. The test methods listed in this Standard are used to determine the values for the physical properties. These physical property values are intended for use in specifications, material evaluations and quality control. They are not intended to predict end-use material performance. This standard applies to material where the continuous service temperature of the substrate is within the range of -60 to +70 °C. The testing and evaluation of a material against this Standard may require the use of materials and/or equipment that could be hazardous. This Standard does not purport to address all the safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any existing applicable regulatory requirements prior to its use. This Standard is intended for installation in open cavities where direct contact with liquid water is not intended or likely.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ULC CAN/ULC 712.1-2024 PDF

ULC CAN/ULC 712.1-2024 PDF

$0.50 $1.00