IEC 60092-506-2003 PDF

IEC 60092-506-2003 PDF

Electric Installations in Ships - Part 506: Special Features - Ships Carrying Specific Dangerous Goods and Materials Hazardous Only in Bulk

$50.44 $100.88 -50%
Product Code: IEC 60092-506
Stock In Stock
Edition: 2.0
Published: 06/2003
Number of Pages: 20
File Size: 1 file, 384 Bytes

Available Options

Product Description

Electric Installations in Ships - Part 506: Special Features - Ships Carrying Specific Dangerous Goods and Materials Hazardous Only in Bulk

Introduction: The Regulations and Codes of the International Maritime Organization (IMO) applicable to the carriage of dangerous goods and materials hazardous only in bulk are contained in several chapters and paragraphs spread over a number of publications. The conditions necessary for the stowage of particular types and sources of ignition etc. are laid down in these IMO publications. These conditions are updated from time to time as ships become more complex with advancing technology. This part of IEC 60092 summarizes the present IMO electrical requirements and gives in a single publication details of suitable measures regarding the explosion protection of electrical equipment, where such cargoes might cause risk of fire or explosion.

Scope: 1.1 This part of IEC 60092 is applicable to the electrical installations on the following types of ships and cargo spaces: a) ships and cargo spaces not specifically designed for the carriage of freight containers but intended for the carriage of dangerous goods in packaged form including goods in freight containers and portable tanks; b) purpose-built container ships and cargo spaces intended for the carriage of dangerous goods in freight containers and portable tanks; c) ro/ro ships and ro/ro cargo spaces intended for the carriage of dangerous goods; d) ships and cargo spaces intended for the carriage of solid dangerous goods in bulk and materials hazardous only in bulk (MHB); e) ships and cargo spaces intended for the carriage of dangerous goods, other than liquids and gases in bulk, in shipborne barges. 1.2 Dangerous goods, for which safety measures may be required with respect to the electrical equipment, are specified in the IMO documents listed in the Foreword and grouped into the following classes. a) Dangerous goods in packaged form Class 1 Explosives, except goods in division 1.4, compatibility group S of the IMDG Code Class 2.1 All flammable gases, compressed, liquefied or dissolved under pressure Class 3 All flammable liquids having a flashpoint from −18 °C up to 23 °C (closed-cup test) Class 6.1 All toxic substances having a flashpoint below 23 °C (closed-cup test) Class 8 All corrosive liquids having a flashpoint 23 °C and below (closed-cup test) b) Solid dangerous goods in bulk Class 4.1 Flammable solids Class 4.2 Substances liable to spontaneous combustion Class 4.3 Substances which, in contact with water, emit flammable gases Class 5.1 Oxidizing substances Class 9 Miscellaneous dangerous substances, that is, any other substance which experience has shown, or may show, to be of such a dangerous character that the provisions of this part will apply to it. c) MHB Materials which, when carried in bulk, present sufficient hazards to require specific precautions – 6 – 60092-506 © IEC:2003(E)

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60092-506-2003 PDF

IEC 60092-506-2003 PDF

$50.44 $100.88