Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices
Introduction: This part of IEC 60118 specifies methods of measurement and requirements for hearing aid immunity to digital wireless devices. Most hearing aids contain digital signal processors and some can contain wireless transceivers. Experience in connection with the use of hearing aids in recent times has identified digital wireless devices, such as wireless telephones and GSM mobile phones, as potential sources of disturbance for hearing aids. Interference in hearing aids depends on the emitted power from the digital wireless device as well as the immunity of the hearing aid. The performance criteria in this document will not totally ensure hearing aid users' interference- and noise-free use of wireless telephones, but will establish useable conditions in most situations. In practice, a hearing aid user, when using a wireless telephone, will seek, if possible, to find a position on the ear, which gives minimum or no interference in the hearing aid. Various test methods have been considered for determining the immunity of hearing aids. When a digital wireless device is used close to a hearing aid, there is an RF near-field illumination of the hearing aid. However, validation investigations in preparing this document have shown that it is possible to establish a correlation between the measured far-field immunity level and the immunity level experienced by an actual hearing aid used in conjunction with a digital wireless device. The use of a far-field test has shown high reproducibility
Scope: This part of IEC 60118 covers the relevant EMC phenomena for hearing aids. Hearing aid immunity to high frequency fields originating from digital wireless devices such as mobile phones was identified as one of the most relevant EMC phenomena impacting hearing aids.
Contents:
- FOREWORD
- INTRODUCTION
- Scope