IEC 60118-14-1998 PDF

IEC 60118-14-1998 PDF

Hearing Aids - Part 14: Specification of a Digital Interface Device

$25.22 $50.44 -50%
Product Code: IEC 60118-14
Stock In Stock
Edition: 1.0
Published: 02/1998
Number of Pages: 32
File Size: 1 file, 103 Bytes

Available Options

Product Description

Hearing Aids - Part 14: Specification of a Digital Interface Device

Introduction: This part of IEC 60118 has been prepared to define the electrical and mechanical characteristics of the interface (the signals and connectors) to be used for the electrical setting of hearing aid parameters. This standard was motivated by a desire to avoid the problem of incompatibility between the hearing aids and the parameter setting devices produced by different manufacturers. The standard assumes a general configuration for the electrical setting of parameters which consist of a general-purpose control device, such as a desktop computer; a hearing aid with electrical control of parameter values; an interface to connect the computer to the hearing aid. This standard only specifies the requirements for the interface between the control device and the hearing aid.

Scope: This part of IEC 60118 specifies the electrical and mechanical requirements for an interface device to allow a general-purpose control device such as a desktop computer to be connected to hearing aids, for the purpose of electrical setting of their operating parameters. There is no specification of anything within the hearing aid, such as types of parameters and their signal processing characteristics, nor is there any specification of the parameter setting procedure – the method used to determine which settings are most appropriate to the person wearing the hearing aid. This standard is restricted to the digital interface between the control device and the hearing aid. This standard provides a specification such that all hearing aids which can be programmed by the specified digital interface may have their parameters set by a single control device and interface device. The specifications of this standard are for use in connection with hearing aids with parameters set by a direct electrical connection using a cable. They do not cover hearing aids with parameters controlled by radio frequency or infrared transmission, or any other "wireless" method of control.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60118-14-1998 PDF

IEC 60118-14-1998 PDF

$25.22 $50.44