IEC 60204-11 (REDLINE + STANDARD)-2018 PDF

IEC 60204-11 (REDLINE + STANDARD)-2018 PDF

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV

$359.39 $718.77 -50%
Product Code: IEC 60204-11 (REDLINE + STANDARD)
Stock In Stock
Edition: 2.0
Published: 07/2018
Number of Pages: 196
File Size: 1 file, 3.3 MB

Available Options

Product Description

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV

Introduction: This part of IEC 60204 provides requirements and recommendations relating to the high- voltage electrical equipment (HV equipment) of machines together with its associated low- voltage electrical equipment (LV equipment) so as to promote safety of persons and property, consistency of control response, ease of maintenance maintainability. High performance is not to be obtained at the expense of the essential factors mentioned above. An example of a possible application of these requirements is a machine or group of machines used for the processing of a material where a failure in such machinery can have serious economic consequences. Figure 1 is a block diagram of a machine and associated equipment showing the various elements of the electrical equipment addressed in this document. Numbers in parentheses (…) refer to clauses and subclauses in this document. It is understood that all of the elements taken together including the safeguards, software and the documentation constitute the machine or group of machines working together with usually at least one level of supervisory control. More guidance on the use of this standard is given in annex F of IEC 60204-1. This document should be used in conjunction with IEC 602041. HV equipment can include LV control parts in the same general enclosure or in separate compartments.

Scope: This part of IEC 60204 applies to electrical and electronic equipment and systems to machines, including a group of machines working together in a co-ordinated manner, but excluding higher level system aspects (i.e. communications between systems) which operate at nominal voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV AC or DC with nominal frequencies not exceeding 60 Hz. This part of IEC 60204 is applicable to equipment, or parts of equipment, which operate with nominal supply voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV a.c. or d.c. with nominal frequencies not exceeding 200 Hz. For higher voltages or frequencies, special requirements may be needed. In this document, the term HV equipment also covers the LV equipment forming an integral part of the equipment operating at high voltage. The requirements in this document primarily cover the parts operating at high-voltage except where explicitly stated otherwise. Reference is made to IEC 60204-1 for those requirements which also apply to HV equipment. NOTE 1 Other LV equipment not forming part of the HV equipment and defined as operating at voltages not exceeding 1 000 V a.c. or 1 500 V d.c. are is covered by IEC 60204-1:2016. NOTE 2 In this document, the term "electrical" includes both electrical and electronic matters (i.e. electrical equipment means both the electrical and the electronic equipment). NOTE 3 This document does not apply to independent high-voltage power supply installations for which separate IEC standards exist. The electrical equipment covered by this document commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). NOTE For the requirements for power supply installations, see HD 637. NOTE 4 For the requirements for high-voltage power supply installations, see IEC 61936-1. This document is an application a generic safety standard and is not intended to limit or inhibit technological advancement. It does not cover all the requirements (e.g. guarding, interlocking or control) which are needed or required by other standards or regulations in order to safeguard personnel from hazards other than electrical hazar

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60204-11 (REDLINE + STANDARD)-2018 PDF

IEC 60204-11 (REDLINE + STANDARD)-2018 PDF

$359.39 $718.77