Standard conditions for use prior to and during the testing of solid electrical insulating materials
Introduction: Many electrical insulating materials have properties which are affected by the temperature or humidity, or both, of the atmospheres to which they are subjected. It is usually necessary, therefore, when testing these materials, to control both temperature and humidity prior to testing, as well as the conditions in which the specimens are actually tested. The selection of appropriate conditions and tests should be decided according to the materials specification and the intended application. Unless otherwise specified, specimens should be conditioned and measured in the same climate as that in which they are to be tested. When giving results of tests on electrical insulating materials likely to be affected by those factors, it is important that the relevant conditions to which the test specimens were exposed are reported. Specifications for such materials should, therefore, identify the atmospheres to which the test specimens should be exposed before testing and the conditions under which the tests are to be made.
Scope: This International Standard gives the accepted conditions of exposure time, temperature, atmospheric humidity and liquid immersion for use in testing solid electrical insulating materials. The range is sufficiently wide to enable suitable conditions to be selected so that either of the primary objects, set out below as a) and b), of conditioning can be achieved. These objectives aim to obtain greater reproducibility of test results by: a) partly counteracting the variations of the properties of the material due to the past history of the test specimens (often known as "normalizing", here called preconditioning), and b) ensuring uniformity of conditions during the testing. This standard is not intended to be applied for determining the influence of exposure to certain temperatures and humidity or immersions in liquids, on the properties of a material. Procedures pertaining to the effect of an environment on a material are given in various parts of IEC 60068.
Contents:
- FOREWORD
- INTRODUCTION
- Scope
- 10 Report