IEC 60355-1971 PDF

IEC 60355-1971 PDF

Appraisal of the Problems of Accelerated Testing for Atmospheric Corrosion

$25.22 $50.44 -50%
Product Code: IEC 60355
Stock In Stock
Edition: 1.0
Published: 1971
Number of Pages: 21
File Size: 1 file, 1.3 MB

Available Options

Product Description

Appraisal of the Problems of Accelerated Testing for Atmospheric Corrosion

Introduction: This Report deals with general information on accelerated tests for atmospheric corrosion. Subsequent clauses cover different applications of accelerated tests as follows : - Clause 2: Tests to predict the performance of a specimen under conditions of use. - Clause 3 : Tests to check the quality and homogeneity of a special material. - Clause 4: Tests to determine the influence of different materials on each other. - Clause 5 : Tests to check the functioning of equipment or components under corrosive con- - Clause 6 gives some information on the standardizing of accelerated tests. - Clause 7 is a generally worded section on conclusions to be drawn from the information available. ditions. 2. Tests to predict the performance of a specimen under conditions of use An ideal general corrosion test could be deñned as : A test that gives in a short time, preferably within a few hours but at least within a few days or weeks, a rating of the behaviour of a material, a component or an equipment that can be cor- related with its performance under conditions of use over several years. Such a test is not possible for several reasons: - conditions of use are not defined and vary over a very wide range ; - in order to accelerate corrosion phenomena, certain corrosive conditions have to be intensified with the danger that the mechanism of the attack and the appearance of the corrosion products may be changed ; - different materials react very differently to intensifying of corrosive factors.

Contents:

  • 1 . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
  • 2.1 Conditions of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
  • 4 . Testing the influence of different materials on each other . . . . . . . . . . . . . . . . 17
  • 5 . Testing the functioning of equipment and components . . . . . . . . . . . . . . . . . 17
  • 6 . Standardizing of corrosion tests . . . . . . . . . . . . . . . . . . . . . . . . . . .
  • 7 . Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
  • 8 . Final remarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
  • 2 . Tests to predict the performance of a specimenunder conditions of use . . . . . . . . . . .
  • 2.2 Methods to accelerate the corrosion process . . . . . . . . . . . . . . . . . . . .
  • 2.3 Different behaviour of different materials to intensifying of corrosive factors . . . . . .

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60355-1971 PDF

IEC 60355-1971 PDF

$25.22 $50.44