IEC 60368-2-1-1988 PDF

IEC 60368-2-1-1988 PDF

Piezoelectric Filters Part 2: Guide to the Use of Piezoelectric Filters Section One - Quartz Crystal Filters

$163.93 $327.86 -50%
Product Code: IEC 60368-2-1
Stock In Stock
Edition: 2.0
Published: 06/1988
Number of Pages: 80
File Size: 1 file, 3 Bytes

Available Options

Product Description

Piezoelectric Filters Part 2: Guide to the Use of Piezoelectric Filters Section One - Quartz Crystal Filters

Introduction: The world continues to move in the direction of more extensive and more complex electronic communication links. Individual messages have either a frequency spectrum or a characteristic in the time domain and some form of filtering process is needed to separate them. New methods of filtering have been developed in response to demands for lower system costs and reduced equipment size. The qualities of a filter are mainly governed by the characteristics of the resonant elements used in the filter. Piezoelectric resonators are superior to conventional LC resonant circuits as regards such characteristics as the quality factor (Q), temperature characteristics, ageing rate, size and weight. Hence, a wide variety of piezoelectric filters is now available. There are two main types of piezoelectric filters: the quartz crystal filter and the ceramic filter. In addition other materials are in use (e.g. lithium tantalate, lithium niobate). 1. Scope This guide has been compiled in response to a generally expressed desire on the pa rt of both users and manufacturers for guidance on the use of quartz crystal filters so that the crystal filters may be used to their best advantage. It is not the aim of this guide to explain theory, nor to attempt to cover all the eventualities which may arise in practical circumstances. The guide draws attention to some of the more fundamental questions which should be considered by the user before placing an order for a crystal filter for a new application. I

Contents:

  • FOREWORD
  • INTRODUCTION
  • 2.1 Introduction
  • 2.2 Terms and definitions
  • 2.3 Filter types
  • 3.1 The equivalent electrical circuit of a qua rtz crystal unit
  • 3.2 Unwanted responses
  • 3.3 Use in filter applications
  • 4.1 Source and load impedance
  • 4.2 Shape factor
  • 4.3 Pass-band ripple
  • 4.4 Minimum transducer attenuation in the pass band
  • 5.1 Effect of bandwidth on availability of crystal band-pass filters
  • 5.2 Effect of difficulties in the manufacture of crystal units
  • 5.3 Effect of environmental characteristics
  • 5.4 Other effects
  • 5.5 Practical design considerations
  • 6.1 Introduction
  • 6.2 Matching
  • 6.3 Achieving stop-band specification
  • 6.4 Input level
  • 8.1 Ordering procedure
  • 8.2 Mandatory requirements
  • 8.3 Optional requirements
  • 9.1 Centre frequency
  • 9.2 Shape factor
  • 9.3 Stop-band attenuation
  • 9.4 Phase linearity and group delay distortion
  • 9.5 Environmental conditions
  • 9.6 General testing considerations

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60368-2-1-1988 PDF

IEC 60368-2-1-1988 PDF

$163.93 $327.86