IEC 60377-1-1973 PDF

IEC 60377-1-1973 PDF

Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 1: General

$50.44 $100.88 -50%
Product Code: IEC 60377-1
Stock In Stock
Edition: 1.0
Published: 01/1973
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 1: General

Introduction: Methods for the determination of the dielectric properties of insulating materials may be divided roughly into two main groups : 1) Lumped-parameter methods can be used when the wavelength of the applied electromagnetic field is large compared with the dimensions of the specimen. These relatively simple methods are dealt with in IEC Publication 250, Recommended Methods for the Determination of the Permit- tivity and Dielectric Dissipation Factor of Electrical Insulating Materials at Power, Audio and Radio Frequencies Including Metre Wavelengths, covering the frequency range from power frequencies up to about 300 MHz. 2) Distributed parameter methods shall be used when the spatial variation of the electromagnetic field over the specimen can no longer be ignored. Methods taking account of wave propagation are described in this recommendation, covering the frequency range from about 300 MHz up to optical frequencies. In a narrow range of frequencies around the " critical " frequency of about 300 MHz (which is shown shadowed in Figure 1, page 25), either one of the main methods may be used, depending mainly on the dimensions and permittivity of the specimen. 1. Object and scope This recommendation applies to the procedures for the determination of relative permittivity and dielectric dissipation factor and of quantities related to them, such as loss index, of dielectric materials in the microwave frequency region (i.e. frequencies above about 300 MHz up to optical frequencies). U

Contents:

  • FOREWORD
  • INTRODUCTION
  • 2.1 Relative complex permittivity Er *
  • 2.2 Relative permittivity C'r
  • 2.3 Loss index e"r
  • 2.4 Dielectric dissipation factor tan S
  • 3.1 Frequency
  • 3.2 Temperature
  • 3.3 Moisture and other impurities
  • 3.4 Physical and chemical structure
  • 3.5 A.C. — Field strength
  • 4.1 Principles of measuring methods
  • 4.2 Test arrangement
  • 4.3 Choice of the test method
  • 5.1 Preparation of specimens
  • 5.2 Conditioning
  • 5.3 Measurement

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60377-1-1973 PDF

IEC 60377-1-1973 PDF

$50.44 $100.88