IEC 60404-17-2021 PDF

IEC 60404-17-2021 PDF

Magnetic materials-Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor

$186.00 $371.99 -50%
Product Code: IEC 60404-17
Stock In Stock
Edition: 1.0
Published: 11/2021
Number of Pages: 98
File Size: 1 file, 2 Bytes

Available Options

Product Description

Magnetic materials – Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor

Introduction: This document provides standard methods to measure the magnetostriction characteristics of grain-oriented electrical steel strip and sheet under an applied AC magnetic field at 50 Hz or 60 Hz. The technical details are specified after intense considerations among magnetostriction experts, so that a satisfactory reproducibility of the measurement can be expected. The measurement requires detections of tiny vibrations of the test specimen at a resolution of 0,01 μm or better. In order to meet this challenging condition, not only the magnetic aspects, but also mechanical aspects of the test apparatus, e.g. the influence of friction, Maxwell forces, resonance and external vibrations, had to be specified. The methods to determine magnetostriction characteristics of the butterfly loop, the peak-to- peak and zero-to-peak values of magnetostriction strain are specified in this document. Subsidiary characteristics of the velocity levels and the acceleration levels are described in Annex E. The technical report IEC TR 62581:2010 [1]1 reviewed the methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel by means of a single sheet tester. Various methods have been used for the measurement of the change in length of the various test specimens. However, for methods using sensors in contact with the test specimen, it is difficult to avoid measurement offsets associated with the contact methods. Moreover, the methods require special skills to be used

Scope: This part of IEC 60404 is applicable to grain-oriented electrical steel strip and sheet specified in IEC 60404-8-7 for the measurement of magnetostriction characteristics under an applied AC magnetic field at 50 Hz or 60 Hz. This document defines the general principles and technical details of the measurement of magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor. NOTE 1 The accelerometer method [5] is also an established method for the measurement of magnetostriction. However, it is more suited to the measurement of magnetostriction under an externally applied tensile or compressive stress, not zero stress, because it places a weight on the test specimen to prevent a deformation of the test specimen. Since this document includes the measurement at zero stress, the optical sensor method is provided as the optimum method. This document is applicable to the measurement of: the butterfly loop; the peak-to-peak value λp-p; the zero-to-peak value λ0-p. The magnetostriction characteristics are determined for a sinusoidal induced secondary voltage, for a specified peak value of the magnetic polarization and at a specified magnetizing frequency. NOTE 2 Throughout this document the term “magnetic polarization” is used as described in IEC 60050-121:1998, 121-11-54. In some standards of the IEC 60404 series, the term “magnetic flux density” is used.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60404-17-2021 PDF

IEC 60404-17-2021 PDF

$186.00 $371.99