IEC 60404-6 (REDLINE + STANDARD)-2018 PDF

IEC 60404-6 (REDLINE + STANDARD)-2018 PDF

Magnetic materials-Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

$171.50 $342.99 -50%
Product Code: IEC 60404-6 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 05/2018
Number of Pages: 86
File Size: 1 file, 2.3 MB

Available Options

Product Description

Magnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens

Introduction: This edition of IEC 60404-6 has been prepared by WG2 in the TC68 maintenance programme of publications. The d.c. measurements in the first edition of this standard are now covered in IEC 60404-4 and Amendment 1 to that standard. This edition of IEC 60404-6 includes measurements on magnetically soft powder materials. Since measurements on these materials at high frequencies employ some of the techniques used to measure magnetic components, there has been active collaboration with IEC TC51. IEC TC51 recently started to publish the new IEC 62044 series which will be composed of four parts. IEC 62044-3 presents methods of measurement of magnetic properties at high excitation levels appropriate to various ferrite core applications, whereas this edition of IEC 60404-6 covers the requirements of material measurements excluding ferrites, so that the two standards do not overlap.

Scope: This part of IEC 60404 specifies methods for the measurement of AC magnetic properties of soft magnetic materials, other than electrical steels and soft ferrites, in the frequency range 20 Hz to 200 100 kHz. The materials covered by this part of IEC 60404 include those speciality alloys listed in IEC 60404-8-6, amorphous and nano-crystalline soft magnetic materials, pressed and sintered and metal injection moulded parts such as are listed in IEC 60404-8-9, cast parts and magnetically soft composite materials. The object of this part is to define the general principles and the technical details of the measurement of the magnetic properties of magnetically soft materials by means of ring methods. For materials supplied in powder form, a ring test specimen is formed by the appropriate pressing method for that material. DC magnetic measurements on magnetically soft materials shall be The measurement of the DC magnetic properties of soft magnetic materials is made in accordance with the ring method of IEC 60404-4. The determinations of the magnetic characteristics of magnetically soft components shall be are made in accordance with IEC 62044-3. NOTE IEC 62044-3:2000 specifies methods for the measurement of AC magnetic characteristics of magnetically soft components in the frequency range up to 10 MHz. Normally, the measurements shall be are made at an ambient temperature of (23 ± 5) °C on ring test specimens which have first been magnetized, then demagnetized. Measurements can be made over other temperature ranges by agreement between supplier and purchaser parties concerned.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • Introduction

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60404-6 (REDLINE + STANDARD)-2018 PDF

IEC 60404-6 (REDLINE + STANDARD)-2018 PDF

$171.50 $342.99