Magnetic materials - Part 8-5: Specifications for individual materials - Electrical steel strip and sheet with specified mechanical properties and magnetic polarization
Introduction: The first edition of IEC 60404-8-5, "Magnetic materials – Part 8: Specifications for individual materials – Section Five – Specification for steel sheet and strip with specified mechanical properties and magnetic permeability", was published in April 1989 and has not been revised for more than 30 years. Since then, new grades of cold-rolled material of minimum proof strength Rp0,2 greater than 400 MPa were developed and widely used. Thus, IEC TC 68 decided in 2017 at their meeting in Paris to revise this document. This revision also includes corrections to the first edition in order to improve consistency with the other parts of the IEC 60404-8 subseries.
Scope: This part of IEC 60404 defines the grades of electrical steel strip and sheet with specified mechanical properties and magnetic polarization. In particular, it gives general requirements, mechanical properties, magnetic polarization, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures. This document applies to electrical steel strip and sheet intended for the construction of poles and rims of rotating electrical machines. The grades are grouped into two classes according to their manufacturing process: hot-rolled grades; cold-rolled grades. They correspond to Class D21 of IEC 60404-1.
Contents:
- FOREWORD
- INTRODUCTION
- Scope