Electromagnetic Compatibility of Electrical and Electronic Installations in Ships
Introduction: Electrical installations of ships with electric and/or electronic systems need to operate under a wide range of environmental conditions. The control of undesired electromagnetic emission ensures that no other device on board will be unduly influenced by the equipment under consideration. Suitable limits are specified. On the other hand, the equipment needs to function without degradation in the normal electromagnetic environment. The limit values for immunity, specified in this International Standard, have been chosen under this assumption. Equipment which is tested and installed in accordance with this International Standard meets the relevant IMO requirements. Special risks, for instance lightning strikes, transients from the operation of circuit breakers and electromagnetic radiation from radio transmitters are also covered. Complex electric and/or electronic systems require EMC planning in all phases of design and installation, considering the electromagnetic environment, any special requirements and the equipment performance. This third edition of IEC 60533 is applicable to electromagnetic compatibility of all electrical and electronic installations in ships with metallic hull. It is based on the assumption that the ship is constructed in such a way that metallic hull and structure parts will significantly attenuate electromagnetic disturbance from the outer deck environment to the inner deck environment and vice versa.
Scope: This International Standard specifies minimum requirements for emission, immunity and performance criteria regarding electromagnetic compatibility (EMC) of electrical and electronic equipment for ships with metallic hull. Additional or divergent requirements for ships with non- metallic hull will be given in a future International Standard (IEC 62742). This International Standard assists in meeting the relevant EMC requirements as stated in SOLAS 74, Chapter IV, Regulation 6 and Chapter V, Regulation 17. Reference to this International Standard is made in IMO Resolution A.813(19). The normative part of this International Standard has been prepared as a product family EMC standard. This International Standard further gives guidelines and recommendations on the measures to achieve EMC in the electrical and electronic installations of the following equipment groups: a) group A: maritime navigation and radio communication equipment and systems; b) group B: power generation and conversion equipment; c) group C: equipment operating with pulsed power; d) group D: switchgear and controlgear; e) group E: intercommunication and signal processing equipment and control systems; f) group F: non-electrical items and equipment; g) group G: integrated systems. The basic EMC standard for groups A and C is IEC 60945. The EMC requirements according to IEC 60945 apply additionally for bridge mounted equipment; equipment in close proximity to receiving antennas; equipment capable of interfering with the safe navigation of the ship and with radio communication. Effects on humans, like exposure to electromagnetic fields, and basic safety requirements such as protection against electric shock and dielectric strength tests for equipment are not within the scope of this International Standard.
Contents:
- FOREWORD
- INTRODUCTION
- Scope