IEC 60534-8-4-2015 PDF

IEC 60534-8-4-2015 PDF

Industrial-process control valves-Part 8-4: Noise considerations-Prediction of noise generated by hydrodynamic flow

$163.93 $327.86 -50%
Product Code: IEC 60534-8-4
Stock In Stock
Edition: 3.0
Published: 09/2015
Number of Pages: 68
File Size: 1 file, 1 Byte

Available Options

Product Description

Industrial-process control valves – Part 8-4: Noise considerations – Prediction of noise generated by hydrodynamic flow

Introduction: It is valuable to predict the noise levels that will be generated by valves. Safety requirements, such as the occupational health standards require that human exposure to noise be limited. There is also data indicating that noise levels above certain levels could lead to pipe failure or affect associated equipment. See IEC 60534-8-3. Earlier hydrodynamic noise standards relied on manufacturer test data and were neither generic nor as complete as desired. The method can be used with all conventional control valve styles including globe, butterfly, cage type, eccentric rotary, and modified ball valves. A valve restricts flow by converting pressure energy into turbulence, heat and mechanical pressure waves in the fluid contained within the valve body and piping. A small portion of this mechanical vibration is converted into acoustical energy. Most of the noise is retained within the piping system with only a small portion passing through the pipe wall downstream of the valve. Calculation of the mechanical energy involved is straightforward. The difficulties arise from determining first the acoustic efficiency of the mechanical energy to noise conversion and then the noise attenuation caused by the pipe wall. This part of IEC 60534 considers only noise generated by normal turbulence and liquid cavitation. It does not consider any noise that might be generated by mechanical vibrations, flashing conditions, unstable flow patterns, or unpredictable behaviour. In the typical installa

Scope: This part of IEC 60534 establishes a method to predict the noise generated in a control valve by liquid flow and the resulting noise level measured downstream of the valve and outside of the pipe. The noise may be generated both by normal turbulence and by liquid cavitation in the valve. Parts of the method are based on fundamental principles of acoustics, fluid mechanics, and mechanics. The method is validated by test data.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60534-8-4-2015 PDF

IEC 60534-8-4-2015 PDF

$163.93 $327.86