IEC 60546-1-2010 PDF

IEC 60546-1-2010 PDF

Controllers with analogue signals for use in industrial-process control systems-Part 1: Methods of evaluating the performance

$163.93 $327.86 -50%
Product Code: IEC 60546-1
Stock In Stock
Edition: 3.0
Published: 08/2010
Number of Pages: 82
File Size: 1 file, 765 Bytes

Available Options

Product Description

Controllers with analogue signals for use in industrial-process control systems – Part 1: Methods of evaluating the performance

Introduction: The methods of evaluation given in this International Standard are intended for use by manufacturers to determine the performance of their products and by users, or independent testing establishments, to verify manufacturers’ performance specifications. Part 2 of IEC 60546 describes a limited series of tests which may be used as acceptance tests. The tests specified in this standard are not necessarily sufficient for instruments specifically designed for unusually arduous duties. Conversely, a restricted series of tests may be suitable for instruments designed to perform within a limited range of conditions. It will be appreciated that the closest liaison should be maintained between an evaluating body and the manufacturer. Note is taken of the manufacturer’s specifications for the instrument when the test program is being decided, and the manufacturer should be invited to comment on both the test program and the results. His comments on the results should be included in any report produced by the testing organization.

Scope: This International Standard applies to proportional-integral-derivative (PID) pneumatic and electric industrial-process controllers using analogue continuous input and output signals which are in accordance with current international standards. It should be noted that while the tests specified herein cover controllers having such signals, they can be applied in principle to controllers having different but continuous signals. It should be also noted that this standard has been written for pneumatic and electric industrial-process controllers with only analogue components and is not necessarily to be used for controllers with microprocessors. This standard is intended to specify uniform methods of test for evaluating the performance of industrial-process PID controllers with analogue input and output signals1). The test conditions specified in this standard, for example the range of ambient temperatures, power supply, etc., are used when no other values are agreed upon by the manufacturer and the user. When a full evaluation in accordance with this standard is not required, those tests which are required shall be performed and the results reported in accordance with those parts of the standard which are relevant. The testing program should be subject to an agreement between manufacturer and user, depending on the nature and the extent of the equipment under consideration.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60546-1-2010 PDF

IEC 60546-1-2010 PDF

$163.93 $327.86