Medical electrical equipment – Part 2-46: Particular requirements for the basic safety and essential performance of operating tables (Commented Version)
Introduction: This particular standard concerns the BASIC SAFETY and ESSENTIAL PERFORMANCE of OPERATING TABLES. It amends and supplements IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020. The aim of this document is to update it with reference to IEC 60601-1:2005, IEC 60601- 1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020 through reformatting and technical changes. The requirements of this particular standard take priority over those of IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020. A "general guidance and rationale" for the more important requirements of this particular standard is included in Annex AA. It is considered that knowledge of the reasons for these requirements will not only facilitate the proper application of the standard but will, in due course, expedite any revision necessitated by changes in clinical practice or as a result of developments in technology. However, Annex AA does not form part of the requirements of this document.
Scope: Replacement: This part of IEC 60601 specifies safety requirements for OPERATING TABLES, whether or not having electrical parts, including TRANSPORTERS, used for the transportation of the OPERATING TABLE top to or from the base or pedestal of an OPERATING TABLE with detachable OPERATING TABLE top. NOTE See also IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020, 4.2. This particular standard does not apply to 3 dental PATIENT chairs (see ISO 7494-1), examination chairs and couches, PATIENT-supporting systems of diagnostic, interventional and therapeutic devices equipment (see IEC 60601-2-54 or IEC 60601-2-43), OPERATING TABLE heating blankets (see IEC 80601-2-35 IEC 60601-2-35), PATIENT transfer equipment, delivery tables and delivery beds, medical beds (see IEC 60601-2-52 and EN 50637), and field tables. If OPERATING TABLES will be used in combination with diagnostic and/or therapeutic devices the relevant requirements of each related particular standard are also applicable. 201.1.2 Object Replacement: The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements for OPERATING TABLES as defined in 201.3.201203. 201.1.3 Collateral standards Addition: This particular standard refers to those applicable collateral standards that are listed in IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/AMD2:2020, Clause 2, and Clause 201.2 of this particular standard. IEC 60601-2-46:2023 CMV © IEC 2023 – 9 – IEC 60601-1-2 and IEC 60601-1-3 apply as modified in Clauses 202 and 203 respectively. IEC 60601-1-8, IEC 60601-1-9, IEC 60601-1-10, IEC 60601-1-11 and IEC 60601-1-12 do not apply. All other published collateral standards in the IEC 60601-1 series apply as published. 201.1.4 Particular standards Replacement: In the IEC 60601 series, particular standards may modify, replace or delete requirements contained in IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012 and IEC 60601-1:2005/ AMD2:2020 and collateral standards as appropriate for the particular ME EQUIPMENT under consideration, and may add other BASIC SAFETY and ESSENTIAL PERFORMANCE requirements. A requirement of a particular st
Contents: