IEC 60669-2-5-2013 PDF

IEC 60669-2-5-2013 PDF

Switches for household and similar fixed electrical installations-Part 2-5: Particular requirements-Switches and related accessories for use in home and building electronic systems (HBES)

$186.00 $371.99 -50%
Product Code: IEC 60669-2-5
Stock In Stock
Edition: 1.0
Published: 10/2013
Number of Pages: 96
File Size: 1 file, 795 Bytes

Available Options

Product Description

Switches for household and similar fixed electrical installations – Part 2-5: Particular requirements – Switches and related accessories for use in home and building electronic systems (HBES)

Scope: This part of IEC 60669 applies to HBES switches with a working voltage not exceeding 250 V a.c. and a rated current up to and including 16 A for household and similar fixed electrical installations either indoors or outdoors and to associated electronic extension units. It applies to: HBES switches for the operation of lamp circuits and the control of the brightness of lamps (dimmers) as well as the control of the speed of motors (e.g. those used in ventilating fans) and for other purposes (e.g. heating installations); sensors, actuators, switched-socket-outlets, associated electronic extension units, etc. In the present standard the word "HBES switch" is applied to describe all kinds of HBES devices e.g. switches, sensors, actuators, switched-socket-outlets, associated electronic extension units, etc. The operation and control are performed: intentionally by a person via an actuating member, a key, a card, etc., via a sensing surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal; by physical means, e.g. light, temperature, humidity, time, wind velocity, presence of people; by any other influence; and transmitted: by an electronic signal via several media, e.g. powerline (mains), twisted pair, optical fibre, radio frequency, infra-red, etc. HBES switches complying with this standard are suitable for use at ambient temperatures not normally exceeding 25 °C, but occasionally reaching 35 °C. This part of IEC 60669also applies to mounting boxes for HBES switches, with the exception of those for flush-type HBES switches which are covered by IEC 60670-1. NOTE 1 In the following country flush mounted boxes are covered by both EN 60670-1 and BS 4662: UK Functional safety aspects of HBES switches are not covered by this standard. Functional safety requirements are covered by the standards of the devices which are controlled by the HBES. In locations where special conditions prevail, e.g. higher temperature, special constructions may be required. NOTE 2 This standard is not intended to cover devices falling within the scope of IEC 60730. 60669-2-5 © IEC:2013 – 7 – NOTE 3 Within this Part 2-5, for any reference to IEC 60669-2-1 and its A

Contents:

  • FOREWORD
  • Scope
  • 10 Protection against electric shock
  • 11 Provision for earthing
  • 12 Terminals
  • 13 Constructional requirements
  • 14 Mechanism
  • 15 Resistance to ageing, protection provided by enclosures of switches, and
  • 16 Insulation resistance and electric strength
  • 17 Temperature rise
  • 18 Making and breaking capacity
  • 19 Normal operation
  • 20 Mechanical strength
  • 21 Resistance to heat
  • 22 Screws, current-carrying parts and connections
  • 23 Creepage distances, clearances and distances through sealing compound
  • 24 Resistance of insulating material to abnormal heat, to fire and to tracking
  • 25 Resistance to rusting
  • 26 EMC requirements
  • 101 Abnormal conditions
  • 102 Components

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60669-2-5-2013 PDF

IEC 60669-2-5-2013 PDF

$186.00 $371.99