IEC 60688-2024 PDF

IEC 60688-2024 PDF

Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals

$163.93 $327.86 -50%
Product Code: IEC 60688
Stock In Stock
Edition: 5.0
Published: 08/2024
Number of Pages: 264
File Size: 1 file, 5 Bytes

Available Options

Product Description

Electrical Measuring Transducers for Converting A.C. Electrical Quantities to Analogue or Digital Signals

Introduction: Energy distribution systems need to guarantee energy efficiency, availability, and network performance to address the following challenges: meet sustainable development requirements, where energy measurement is necessary to identify sources of energy savings, and to improve the energy performance of manufacturing, commercial organisations, and public services; adjust to technological evolutions (electronic loads, electronic measuring methods, etc.); address end-user needs (cost saving, compliance building regulations, etc.) regarding electrical energy management; ensure safety and continuity of service; adjust to the evolution of installation standards; meet the needs of new applications for DC systems (photovoltaic, electrical vehicle, DC distribution, etc.). Monitoring electrical quantities in internal networks contributes to addressing these challenges. To set up this monitoring, transducers: perform the measurement of different types of electrical quantities, convert AC and DC electrical quantities to analogue or digital signals, can be combined with measuring equipment to monitor and analyse electrical quantities. NOTE Some of the terms used in this document are different from those used in IEC 60051 (all parts) due to the fundamental differences between indicating instruments and measuring transducers.

Scope: This document applies to transducers (TRD) with electrical inputs and outputs for making measurements of AC or DC electrical quantities. The output signal can be in the form of an analogue or digital signal. This document applies to measuring transducers used for converting electrical quantities such as: current, voltage, active power, reactive power, power factor, phase angle, frequency, harmonics or total harmonic distortion, apparent power, and DC power to an output signal. NOTE The above electrical quantities include AC and/or DC components. This document applies a) if the fundamental frequency of the input(s) lies between 0 Hz and 1 500 Hz, b) to the electrical measuring transducer if it is part of a system for the measurement of an electrical or non-electrical quantity, c) to transducers for use in a variety of applications such as telemetry and process control and in one of a number of defined environments. This document is not applicable for: instrument transformers that comply with IEC 61869 (all parts), transmitters for use in an industrial process application that comply with IEC 60770 (all parts), power metering and monitoring devices (PMD) that comply with IEC 61557-12, meters that comply with the IEC 62053 series, handheld sensors, residual current monitoring devices (RCMs) that comply with IEC 62020-1, residual current detecting devices (RDC-DD) that comply with IEC 62955, in-cable control and protection devices (IC-CPDs) that comply with IEC 62752, modular residual current devices (MRCDs) that comply with IEC 60947-2:2016/AMD1:2019, Annex M. IEC 60688:2024 © IEC 2024 – 13 – Within the measuring range, the output signal is a function of the measurand. An auxiliary supply can be required. This document is intended: to specify the terminology and definitions relating to transducers whose main application is in industry, to unify the test methods used in evaluating transducer performance, to specify accuracy limits and output values for transducers.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60688-2024 PDF

IEC 60688-2024 PDF

$163.93 $327.86