IEC 60704-2-2 (REDLINE + STANDARD)-2023 PDF

IEC 60704-2-2 (REDLINE + STANDARD)-2023 PDF

Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-2: Particular requirements for fan heaters

$85.75 $171.50 -50%
Product Code: IEC 60704-2-2 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 12/2023
Number of Pages: 46
File Size: 1 file, 1.3 MB

Available Options

Product Description

Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 2-2: Particular requirements for fan heaters

Introduction: The measuring conditions specified in this part 2-2 provide for sufficient accuracy in determining the noise emitted and comparing the results of measurements taken by different laboratories, whilst simulating as far as possible the practical use of fan heaters. It is recommended to consider the determination of noise levels as part of a comprehensive testing procedure covering many aspects of the properties and performance of fan heaters. NOTE As stated in the introduction to IEC 60704-1, this test code is concerned with airborne noise only.

Scope: 1.1.1 General Replacement: This part of IEC 60704 applies to electric fan heaters, designed for placing on the floor, table or counter, etc., or for wall mounting. This document does not apply to electric storage room heaters; room humidifiers; room dehumidifiers; air cleaners; heaters designed exclusively for industrial purposes. 1.1.2 Types of noise Replacement: ISO 3743-1, ISO 3743-2 and ISO 3744 can be used for measuring noise emitted by fan heaters. 1.1.3 Size of the source Replacement: The method specified in ISO 3744 is applicable to noise sources of any size. When applying ISO 3743-1 and ISO 3743-2, care should be taken that the maximum size of the appliance under test fulfils the requirements specified in Subclause 1.3 of ISO 3743-1 and ISO 3743-2. 1.2 Object Addition: The frequency range of interest for sound power determination on fan heaters includes at least the octave bands with centre frequencies from 63 Hz to 8000 Hz. NOTE 1 In many cases, the 63 Hz octave band level does not participate significantly to the A-weighted level. NOTE 2 When measuring this 63 Hz octave band, a special attention should be paid to the room effect. – 8 – IEC 60704-2-2:2023 RLV  IEC 2023 Requirements for the declaration of noise emission values are not within the scope of this standard. NOTE 3 For determining and verifying noise emission values, declared in product specifications, refer to IEC 60704-3:2019. 1.3 Measurement uncertainty Replacement: The estimated values of standard deviations of sound power levels, determined according to this standard, are as follows: Standard deviation, dB σr (repeatability) σR (reproducibility) 0,4 1,0 1.101 Standard deviation for declaration and verification For the purpose of determining and verifying declared noise emission values according to IEC 60704-3, the following values apply: Standard deviation, dB σP (production) σt (total) σM (reference) 0,3 – 1,1 1,0 – 1,6 1,5

Contents:

  • FOREWORD
  • INTRODUCTION

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60704-2-2 (REDLINE + STANDARD)-2023 PDF

IEC 60704-2-2 (REDLINE + STANDARD)-2023 PDF

$85.75 $171.50