IEC 60749-43-2017 PDF

IEC 60749-43-2017 PDF

Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans

$163.93 $327.86 -50%
Product Code: IEC 60749-43
Stock In Stock
Edition: 1.0
Published: 06/2017
Number of Pages: 78
File Size: 1 file, 1 Byte

Available Options

Product Description

Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans

Introduction: This document provides guidelines for semiconductor IC vendors in the preparation of detailed reliability test plans for device qualification. Such plans are intended to be prepared before commencing qualification tests and after consultation with the user of their semiconductor integrated circuit product. The guideline gives some examples for creating reliability qualification test plans to determine appropriate reliability test conditions based on the quality standards demanded in use conditions for each application of semiconductor integrated circuits. Categories are set for automotive applications and for general applications as a target of reliability. The grade for automotive use is further classified into two grades according to applications. The guideline assumes annual operating hours, useful life, etc. for each grade, and defines the verification methods for early failure rate and wear-out failure to propose appropriate reliability tests, and at the same time, presents concepts to properly ensure the quality of semiconductor integrated circuits using screening techniques which are designed to reduce the early failure rate. Note that the test conditions and the values of acceleration factors presented in this guideline are shown to provide examples of calculations for obtaining reliability test conditions in order to verify the required quality standards, and are not designed to define the standards to ensure reliability of semiconductor integrated circuits. NOTE Qua

Scope: This part of IEC 60749 gives guidelines for reliability qualification plans of semiconductor integrated circuit products (ICs). This document is not intended for military- and space-related applications. NOTE 1 The manufacturer can use flexible sample sizes to reduce cost and maintain reasonable reliability by this guideline adaptation based on EDR-4708, AEC Q100, JESD47 or other relevant document can also be applicable if it is specified. NOTE 2 The Weibull distribution method used in this document is one of several methods to calculate the appropriate sample size and test conditions of a given reliability project.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 60749-43-2017 PDF

IEC 60749-43-2017 PDF

$163.93 $327.86