IEC 61131-6-2012 PDF

IEC 61131-6-2012 PDF

Programmable controllers-Part 6: Functional safety

$255.36 $510.71 -50%
Product Code: IEC 61131-6
Stock In Stock
Edition: 1.0
Published: 10/2012
Number of Pages: 208
File Size: 1 file, 1 Byte

Available Options

Product Description

Programmable controllers – Part 6: Functional safety

Introduction: General IEC 61131 series consists of the following parts under the general title Programmable controllers: Part 1: General information Part 2: Equipment requirements and tests Part 3: Programming languages Part 4: User guidelines Part 5: Communications Part 6: Functional safety Part 7: Fuzzy control programming Part 8: Guidelines for the application and implementation of programming languages This Part of IEC 61131 series constitutes Part 6 of a series of standards on programmable controllers and the associated peripherals and should be read in conjunction with the other parts of the series. As this document is the FS-PLC product standard, the provisions of this part should be considered to govern in the area of programmable controllers and their associated peripherals. Compliance with Part 6 of IEC 61131 cannot be claimed unless the requirements of Clause 4 of this part are met. Terms of general use are defined in Part 1 of IEC 61131. More specific terms are defined in each part. In keeping with 1.1 of IEC 61508-1:2010, this part encompasses the product specific requirements of IEC 61508-1, 61508-2 and 61508-3 as pertaining to programmable controllers and their associated peripherals. This document’s intent is to follow the IEC 61508 series structure, in principle. But some aspects do not have a direct correlation and thus need to be addressed somewhat differently. In part, this is due to addressing hardware, software, firmware, etc. in a single document. Framework of this p

Scope: This Part of the IEC 61131 series specifies requirements for programmable controllers (PLCs) and their associated peripherals, as defined in Part 1, which are intended to be used as the logic subsystem of an electrical/electronic/programmable electronic (E/E/PE) safety-related system. A programmable controller and its associated peripherals complying with the requirements of this part is considered suitable for use in an E/E/PE safety-related system and is identified as a functional safety programmable logic controller (FS-PLC). An FS-PLC is generally a hardware (HW) / software (SW) subsystem. An FS-PLC may also include software elements, for example predefined function blocks. An E/E/PE safety-related system generally consists of sensors, actuators, software and a logic subsystem. This part is a product specific implementation of the requirements of the IEC 61508 series and conformity to this part fulfils all of the applicable requirements of the IEC 61508 series related to FS-PLCs. While the IEC 61508 series is a system standard, this part provides product specific requirements for the application of the principles of the IEC 61508 series to FS-PLC. This Part of the IEC 61131 series addresses only the functional safety and safety integrity requirements of an FS-PLC when used as part of an E/E/PE safety-related system. The definition of the functional safety requirements of the overall E/E/PE safety-related system and the functional safety requirements of the ultimate application of the E/E/PE safety-related system are outside the scope of this part, but they are inputs for this part. For application specific information the reader is referred to standards such as the IEC 61511 series, IEC 62061, and the ISO 13849 series. This part does not cover general safety requirements for an FS-PLC such as requirements related to electric shock and fire hazards specified in IEC 61131-2. This part applies to an FS-PLC with a Safety Integrity Level (SIL) capability not greater than SIL 3. The objective of this part is: to establish and describe the safety life-cycle elements of an FS-PLC, in harmony with the general safety life-cycle identified in IEC 61508-1, -2 and -3; to

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope
  • 9.4.10 ASIC design and development
  • 9.4.11 Techniques and measures to prevent the introduction of faults in

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61131-6-2012 PDF

IEC 61131-6-2012 PDF

$255.36 $510.71