Printed board and printed board assemblies – Design and use – Part 5-8: Attachment (land/joint) considerations – Area array components (BGA, FBGA, CGA, LGA)
Introduction: This part of IEC 61188 covers land patterns for area array components which include ball grid array (BGA) parts (rigid, flexible or ceramic substrate); fine pitch ball grid array (FBGA) parts (rigid or flexible substrate); column grid array (CGA) parts (ceramic substrates) and land grid array (LGA) parts (ceramic substrates). Each clause contains information in accordance with the area array family of components and their requirements for appropriate land patterns. The proposed land pattern dimensions in this standard are based upon the fundamental tolerance calculation combined with the given land geometries and courtyard excesses (see IEC 61188-5-1, Generic requirements). The courtyard includes all issues of the normal manufacturing necessities. The unaltered land pattern dimensions of this part are generally applicable for the solder paste application plus the reflow soldering process. Although other standards in the IEC 61188-5 series define three levels of land pattern dimensioning, this standard will only define two levels. One level (level 2) is for non collapsing BGA balls; the other level (level 3) is for those BGA components where the ball does collapse around the land. All land descriptions are non-solder mask defined. Each land pattern has been assigned an identification number to indicate the characteristics of the specific robustness of the land patterns. Users also have the opportunity to organize the information so that it is most useful for their particular d
Scope: This part of IEC 61188 provides information on land pattern geometries used for the surface attachment of electronic components with area array terminations in the form of solder balls, solder columns or protective coated lands. The intent of the information presented herein is to provide the appropriate size, shape and tolerances of surface mount land patterns to ensure sufficient area for the appropriate solder joint, and also allow for inspection, testing and reworking of those solder joints. Each clause contains a specific set of criteria such that the information presented is consistent, providing information on the component, the component dimensions, the solder joint design and the land pattern dimensions. The land pattern dimensions are based on a mathematical model that establishes a platform for a solder joint attachment to the printed board. The existing models create a platform that is capable of establishing a reliable solder joint no matter which solder alloy is used to make that joint (lead-free, tin lead, etc.). Process requirements for solder reflow are different depending on the solder alloy and should be analyzed so that the process is taking place above the liquidus temperature of the alloy, and remains above that temperature a sufficient time to form a reliable metallurgical bond. Area array land patterns do not use "land protrusion" concepts and attempt to match the characteristics of the physical and dimensional termination properties. There are several configurations available, as shown in Figure 1. However, the tables provided show only the optimum dimension across the outer construction of the land. Circle Hexagon Via in Pad Dog Bone IEC 2028/07 Figure 1 – Area array land pattern configuration
Contents:
- FOREWORD
- INTRODUCTION
- Scope