IEC 61260-2-2017 PDF

IEC 61260-2-2017 PDF

Electroacoustics-Octave-band and fractional-octave-band filters-Part 2: Pattern-evaluation tests

$179.70 $359.39 -50%
Product Code: IEC 61260-2
Stock In Stock
Edition: 1.1
Published: 04/2017
Number of Pages: 106
File Size: 1 file, 1 Byte

Available Options

Product Description

Electroacoustics – Octave-band and fractional-octave-band filters – Part 2: Pattern-evaluation tests

Introduction: IEC 61260:1995 and IEC 61260:1995/AMD 1:2001 are now separated into the following three parts of IEC 61260 series: Part 1: Specifications Part 2: Pattern-evaluation tests Part 3: Periodic tests For assessments of conformance to performance specifications, IEC 61260-1 uses different criteria than were used for the IEC 61260:1995 edition. IEC 61260:1995 did not provide any requirements or recommendations to account for the uncertainty of measurement in assessments of conformance to specifications. This absence of requirements or recommendations to account for uncertainty of measurement created ambiguity in determinations of conformance to specifications for situations where a measured deviation from a design goal was close to the limit of the allowed deviation. If conformance was determined based on whether a measured deviation did or did not exceed the limits, the end-user of the octave-band and fractional-octave-band filters incurred the risk that the true deviation from a design goal exceeded the limits. To remove this ambiguity, IEC Technical Committee 29, at its meeting in 1996, adopted a policy to account for measurement uncertainty in assessments of conformance in International Standards that it prepares. This edition of IEC 61260-2 uses an amended criterion for assessing conformance to a specification. Conformance is demonstrated when (a) measured deviations from design goals do not exceed the applicable acceptance limits and (b) the uncertainty of measurement does not

Scope: 1.1 This part of IEC 61260 provides details of the tests necessary to verify conformance to all mandatory specifications given in IEC 61260-1:2014 for octave-band and fractional-octave- band filters. 1.2 Tests and test methods are applicable to class 1 and class 2 bandpass filters. The aim is to ensure that all testing laboratories use consistent methods to perform pattern-evaluation tests.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61260-2-2017 PDF

IEC 61260-2-2017 PDF

$179.70 $359.39