IEC 61400-50-1-2022 PDF

IEC 61400-50-1-2022 PDF

Wind energy generation systems-Part 50-1: Wind measurement-Application of meteorological mast, nacelle and spinner mounted instruments

$239.59 $479.18 -50%
Product Code: IEC 61400-50-1
Stock In Stock
Edition: 1.0
Published: 11/2022
Number of Pages: 166
File Size: 1 file, 7 Bytes

Available Options

Product Description

Wind energy generation systems – Part 50-1: Wind measurement – Application of meteorological mast, nacelle and spinner mounted instruments

Introduction: This part of IEC 61400 specifies procedures and methods which ensure that wind measurements using cup or sonic anemometers mounted on meteorological masts or wind turbine nacelles/spinners are carried out and reported consistently and in accordance with best practice. This document does not define the purpose or use case of the wind measurements. However, as this document forms part of the IEC 61400 series of standards, it is anticipated that the wind measurements carried out in accordance with this standard will be used in relation to some form of wind energy testing or resource assessment. The main clauses of this document are not mutually dependent. Therefore, it is possible that a user will refer to only certain of the main clauses rather than all clauses to adapt this document to their specific use case. However, the main clauses are presented in a logical sequence that could be applied in practice. The technical content of this document could previously be found in IEC 61400-12-1:2017 and IEC 61400-12-2:2013. NOTE A technical correction to the value of the tolerance of the anemometer mounting tube has been made in 10.2. Due to the increasing complexity of these source documents, IEC TC 88 decided that a re-structuring of the IEC 61400-12 series of standards into a number of more specific parts would allow more efficient management and maintenance going forward. This document has been created as part of that re-structuring process. The requirements on wind measurement sp

Scope: IEC 61400-50 specifies methods and requirements for the application of instruments to measure wind speed (and related parameters, e.g. wind direction, turbulence intensity). Such measurements are required as an input to some of the evaluation and testing procedures for wind energy and wind turbine technology (e.g. resource evaluation and turbine performance testing) described by other standards in the IEC 61400 series. This document is applicable specifically to the use of wind measurement instruments mounted on meteorological masts, turbine nacelles or turbine spinners which measure the wind at the location at which the instruments are mounted. This document excludes remote sensing devices which measure the wind at some location distant from the location at which the instrument is mounted (e.g. vertical profile or forward facing lidars). This document specifies the following: a) the classification parameters for cup and sonic anemometers such that the uncertainty in wind speed measurement for a specific type and model of anemometer exposed to a certain class of environmental conditions can be assessed; b) the procedure and requirements for classifying cup and sonic anemometers as, for example, part of the type testing of a specific anemometer model and type; c) the procedures and requirements for wind tunnel calibration of anemometers; d) an additional or alternative method of checking the consistency of the calibration of an anemometer in the field by carrying out an in-situ comparison with another anemometer; e) the requirements for the mounting of anemometers and other instruments on meteorological masts; f) the assessment of wind speed measurement uncertainty; g) reporting requirements.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61400-50-1-2022 PDF

IEC 61400-50-1-2022 PDF

$239.59 $479.18