Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements
Introduction: This document has been prepared in accordance with the requirements of IEC 61477. The products designed and manufactured according to this document contribute to the safety of the users, provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use. The product covered by this document may have an impact on the environment during some or all stages of its life cycle. These impacts can range from slight to significant, be of short- term or long-term duration, and occur at the global, regional or local level. This document does not include requirements and test provisions for the manufacturers of the product, or recommendations to the users of the product for environmental improvement. However, all parties intervening in its design, manufacture, packaging, distribution, use, maintenance, repair, reuse, recovery and disposal are invited to take account of environmental considerations.
Scope: This part of IEC 61482 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials and garments for protective clothing for electrical workers against the thermal hazards of an electric arc based on. relevant general properties of the textiles, tested with selected textile test methods, and arc thermal resistance properties, such as the arc rating of materials (ATPV or EBT50), when tested with an open electric arc under defined laboratory conditions according to IEC 61482-1-1, or the arc protection class of materials and garments (Class 1 or Class 2), when tested with a directed and constrained electric arc under defined laboratory conditions according to IEC 61482-1-2. Requirements of this standard do not address electric shock hazards. The present standard is applicable in combination with standards covering such hazards. NOTE 1 If conductive fibres are used in the construction of the garments the risk for electric shock hazard should be considered. This standard does not contain requirements for the protection of head, hands and feet. NOTE 2 Requirements and tests to cover these hazards are under development. Requirements of this standard do not cover the electric arc hazards of electric shock, noise, UV emissions, pressure shrapnel, hot oil, the consequences of physical and mental shock and the toxic influences. NOTE 3 The standard is applicable in combination with standards covering such hazards. Electric shock hazard is not covered by this document, which is applicable in combination with standards covering such hazards. Other effects than the thermal effects of an electric arc like noise, light emissions, pressure rise, hot oil, electric shock, the consequences of physical and mental shock or toxic influences are not covered by this document. Protection of eyes, face, head, hands and feet against electric arc hazard is not covered by this document. NOTE Requirements and tests to cover electric arc hazards to these parts of the body are under development. Protective clothing for work intentionally using an electric arc, e.g. ar
Contents:
- FOREWORD
- INTRODUCTION
- Scope