Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 4: Definitions and abbreviations
Introduction: Systems comprised of electrical and/or electronic elements have been used for many years to perform safety functions in most application sectors. Computer-based systems (generically referred to as programmable electronic systems) are being used in all application sectors to perform non-safety functions and, increasingly, to perform safety functions. If computer system technology is to be effectively and safely exploited, it is essential that those responsible for making decisions have sufficient guidance on the safety aspects on which to make these decisions. This International Standard sets out a generic approach for all safety lifecycle activities for systems comprised of electrical and/or electronic and/or programmable electronic (E/E/PE) elements that are used to perform safety functions. This unified approach has been adopted in order that a rational and consistent technical policy be developed for all electrically-based safety-related systems. A major objective is to facilitate the development of product and application sector international standards based on the IEC 61508 series. NOTE 1 Examples of product and application sector international standards based on the IEC 61508 series are given in the Bibliography (see references [1], [2] and [3]). In most situations, safety is achieved by a number of systems which rely on many technologies (for example mechanical, hydraulic, pneumatic, electrical, electronic, programmable electronic). Any safety strategy must therefore c
Scope: 1.1 This part of IEC 61508 contains the definitions and explanation of terms that are used in parts 1 to 7 of the IEC 61508 series of standards. 1.2 The definitions are grouped under general headings so that related terms can be understood within the context of each other. However, it should be noted that these headings are not intended to add meaning to the definitions. 1.3 IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.3 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are also intended for use as stand-alone publications. The horizontal safety function of this international standard does not apply to medical equipment in compliance with the IEC 60601 series. 1.4 One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the publications prepared by those technical committees. 1.5 Figure 1 shows the overall framework of the IEC 61508 series and indicates the role that IEC 61508-4 plays in the achievement of functional safety for E/E/PE safety-related systems. – 8 – 61508-4 © IEC:2010 Figure 1 – Overall framework of the IEC 61508 series
Contents:
- FOREWORD
- INTRODUCTION
- Scope