IEC 61511-3-2016 PDF

IEC 61511-3-2016 PDF

Functional safety-Safety instrumented systems for the process industry sector-Part 3: Guidance for the determination of the required safety integrity levels

$255.36 $510.71 -50%
Product Code: IEC 61511-3
Stock In Stock
Edition: 2.0
Published: 07/2016
Number of Pages: 228
File Size: 1 file, 4 Bytes

Available Options

Product Description

Functional safety – Safety instrumented systems for the process industry sector – Part 3: Guidance for the determination of the required safety integrity levels

Introduction: Safety instrumented systems (SIS) have been used for many years to perform safety instrumented functions (SIF) in the process industries. If instrumentation is to be effectively used for SIF, it is essential that this instrumentation achieves certain minimum standards and performance levels. The IEC 61511 series addresses the application of SIS for the process industries. A process hazard and risk assessment is carried out to enable the specification for SIS to be derived. Other safety systems are only considered so that their contribution can be taken into account when considering the performance requirements for the SIS. The SIS includes all devices and subsystems necessary to carry out the SIF from sensor(s) to final element(s). The IEC 61511 series has two concepts which are fundamental to its application; SIS safety life-cycle and safety integrity levels (SIL). The IEC 61511 series addresses SIS which are based on the use of Electrical (E)/Electronic (E)/Programmable Electronic (PE) technology. Where other technologies are used for logic solvers, the basic principles of the IEC 61511 series should be applied. The IEC 61511 series also addresses the SIS sensors and final elements regardless of the technology used. The IEC 61511 series is process industry specific within the framework of IEC 61508:2010. The IEC 61511 series sets out an approach for SIS safety life-cycle activities to achieve these minimum standards. This approach has been adopted in order that a rational a

Scope: This part of IEC 61511 provides information on: the underlying concepts of risk and the relationship of risk to safety integrity (see Clause A.4); the determination of tolerable risk (see Annex K); a number of different methods that enable the safety integrity level (SIL) for the safety instrumented functions (SIF) to be determined (see Annexes B through K); the impact of multiple safety systems on calculations determining the ability to achieve the desired risk reduction (see Annex J). In particular, this part of IEC 61511: a) applies when functional safety is achieved using one or more SIF for the protection of either personnel, the general public, or the environment; b) may be applied in non-safety applications such as asset protection; c) illustrates typical hazard and risk assessment methods that may be carried out to define the safety functional requirements and SIL of each SIF; d) illustrates techniques/measures available for determining the required SIL; e) provides a framework for establishing SIL but does not specify the SIL required for specific applications; f) does not give examples of determining the requirements for other methods of risk reduction. NOTE Examples given in the Annexes of this Standard are intended only as case specific examples of implementing IEC 61511 requirements in a specific instance, and the user should satisfy themselves that the chosen methods and techniques are appropriate to their situation. Annexes B through K illustrate quantitative and qualitative approaches and have been simplified in order to illustrate the underlying principles. These annexes have been included to illustrate the general principles of a number of methods but do not provide a definitive account. NOTE 1 Those intending to apply the methods indicated in these annexes can consult the source material referenced in each annex. NOTE 2 The methods of SIL determination included in Part 3 may not be suitable for all applications. In particular, specific techniques or additional factors that are not illustrated may be required for high demand or continuous mode of operation. NOTE 3 The methods as illustrated herein may result in non-conservative results when the

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61511-3-2016 PDF

IEC 61511-3-2016 PDF

$255.36 $510.71