IEC 61868-1998 PDF

IEC 61868-1998 PDF

Mineral Insulating Oils - Determination of Kinematic Viscosity at Very Low Temperatures

$25.22 $50.44 -50%
Product Code: IEC 61868
Stock In Stock
Edition: 1.0
Published: 11/1998
Number of Pages: 30
File Size: 1 file, 149 Bytes

Available Options

Product Description

Mineral Insulating Oils - Determination of Kinematic Viscosity at Very Low Temperatures

Introduction: Non-Newtonian behaviour and significant increases in viscosity at very low temperatures have been observed in some mineral insulating oils as a result of microcrystalline growth, with a potential risk of failure for electrical equipment re-energized under very cold weather conditions. Microcrystalline formation is a slow process, which can take relatively long periods of low- temperature soaking to show its full effects, and which can also be destroyed by inducing movement in the oil, possibly as a result of heat producing friction or shear forces. This standard presents the adaptations to be made to ISO 3104 to take into account these effects and to allow the measurement of kinematic viscosity at very low temperatures, without subjecting the oil sample to warming or undue movement during measurement, and with the application of a soaking period, in order to adequately simulate the flow of oil in electrical equipment, for example in the small cooling passages and timing mechanisms of transformers.

Scope: This International Standard specifies a procedure for the determination of the kinematic viscosity of mineral insulating oils, both transparent and opaque, at very low temperatures, after a cold soaking period of at least 20 h, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. It is applicable at all temperatures to both Newtonian and non-Newtonian liquids having viscosities of up to 20 000 mm2 × s–1. It is particularly suitable for the measurement of the kinematic viscosity of liquids for use in cold climates, at very low temperatures (–40 °C) or at temperatures between the cloud and pour-point temperatures (typically –20 °C) where some liquids may develop unexpectedly high viscosities under cold soak conditions.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 61868-1998 PDF

IEC 61868-1998 PDF

$25.22 $50.44