IEC 62067 (REDLINE + STANDARD)-2022 PDF

IEC 62067 (REDLINE + STANDARD)-2022 PDF

Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV)-Test methods and requirements

$407.31 $814.61 -50%
Product Code: IEC 62067 (REDLINE + STANDARD)
Stock In Stock
Edition: 3.0
Published: 04/2022
Number of Pages: 270
File Size: 1 file

Available Options

Product Description

Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements

Introduction: As a result of major developments in cable systems with extruded insulation for voltages above 150 kV, CIGRE Study Committee (SC) 21 set up Working Group (WG) 21.03 in 1990. The terms of reference of WG 21.03 were "to prepare recommendations for electrical type tests, sample and routine tests, based on extending IEC 60840:1988 up to 400 kV and to make proposals for prequalification/development tests which, as a minimum, should be performed". WG 21.03 reported that the extension of IEC 60840 [2] to voltages above 150 kV needed extra consideration because of the following factors: 1) such cables form part of the backbone of the transmission system and, therefore, reliability considerations are of the highest priority; 2) these cables and their accessories operate with higher electrical stresses than cables up to 150 kV and, as a result, have a smaller safety margin with respect to the intrinsic performance boundaries of the cable system; 3) such cables and accessories have a thicker insulation wall than those up to 150 kV and, as a result, are subjected to greater thermo-mechanical effects; 4) the design and coordination of the cables and accessories become more difficult with increasing system voltage levels. The recommendations of the WG 21.03 were published in Electra No. 151 [3] [4] in December 1993 and taken into account by IEC in 1995 in the preparation of this standard for cable systems with extruded insulation for voltages above 150 kV. IEC considered that the new stand

Scope: This document specifies test methods and requirements for power cable systems, cables with extruded insulation and their accessories for fixed installations, for rated voltages above 150 kV (Um = 170 kV) up to and including 500 kV (Um = 550 kV). The requirements apply to single-core cables and to their accessories for usual conditions of installation and operation, but not to special cables and their accessories, such as submarine cables, for which modifications to the standard tests may can be necessary or special test conditions that may need to be devised. This document does not cover transition joints between cables with extruded insulation and paper insulated cables.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62067 (REDLINE + STANDARD)-2022 PDF

IEC 62067 (REDLINE + STANDARD)-2022 PDF

$407.31 $814.61