Fibre optic active components and devices – Performance standards – Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices
Introduction: Fibre optic laser devices are used to convert electrical signals into optical signals. This part of IEC 62149 covers the performance specification for 1 310 nm discrete vertical cavity surface emitting laser devices in fibre optic telecommunication and optical data transmission applications.
Scope: This part of IEC 62149 covers the performance specification for 1 310-nm discrete vertical cavity surface emitting laser (VCSEL) devices of transverse single-mode and multimode types used for the fibre optic telecommunication and optical data transmission application in a form of the VCSEL chips mounted on a substrate with wire bonding to their chips’ anode and cathode terminals without any fibre pigtails. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run on a “one-off” basis to prove any product’s ability to satisfy the performance standard’s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but should then be controlled by a quality assurance/quality conformance program. Depending on the signalling speed and application areas, subcategorized specifications of the 1 310-nm discrete VCSEL are defined as shown in Table 1. Table 1 – Subcategorized specifications of the 1 310-nm discrete VCSEL 1,0625 GBd 1,25 GBd 2,125 GBd 3,125 GBd 4,25 GBd 8,5 GBd 10 GBda 16 GBd 25,78125 GBd Fibre Channel FC1GB FC2GB FC4GB FC8GB FC16GB Ethernet E1A1a E1A1b E1B E3A1a E3A1b E10BLX4 E10BLR E10BLW E40BLR4 E25Bc NOTE Bd is baud rate; A1a is 50 µm core multimode fibre; A1b is 62, 5 µm core multimode fibre; B is single- mode fibre; LR is 10 G LAN; LW is 10 G WAN; LR4 is 40 G WDM. (Refer to IEC 60793-2, IEEE 802.3-2002, INCITS 450-2009, INCITS/Project 2118-D/Rev1.00-2008.09.25, IEEE 802.3-2005, and IEEE P802.3ba-2009.) a Nominal signal rate of 10 G Ethernet is 10,312 5 GBd for E10BLR and E40BLR4 and 9,953 28 GBd for E10BLW. b, c VCSEL specifications for signalling rates of 16 GBd, 25,781 25 GBd and above are left for future works. Each subcategorized specification is also defined by separate details depending on the device types, such as specifications for a VCSEL device without a monitor photodiode (Case a) and for a VCSEL device with a monitor photodiode (Case b).
Contents:
- FOREWORD
- INTRODUCTION
- Scope