IEC 62282-6-101-2024 PDF

IEC 62282-6-101-2024 PDF

Fuel cell technologies-Part 6-101: Micro fuel cell power systems-Safety-General requirements

$211.22 $422.43 -50%
Product Code: IEC 62282-6-101
Stock In Stock
Edition: 1.0
Published: 02/2024
Number of Pages: 122
File Size: 1 file, 2 Bytes

Available Options

Product Description

Fuel cell technologies – Part 6-101: Micro fuel cell power systems – Safety – General requirements

Introduction: IEC 62282-6-100 has been restructured to make it more user friendly. The new IEC 62282-6-1XX series consists of IEC 62282-6-101 and subsequent parts of the IEC 62282-6-1XX series which will replace IEC 62282-100 on a case-by-case basis. Until subsequent specific parts of the IEC 62282-6-1XX series are completed, a suitable transition period will apply. IEC 62282-6-101 covers general safety requirements common to all fuel types. IEC 62282-6-102 and subsequent parts in the IEC 62282-6-1XX series will cover detailed requirements for specific fuel cartridges based on the requirements of IEC 62282-6-101, as shown in Table 1: Technology specific parts.

Scope: 1.1 General a) This part of IEC 62282 covers micro fuel cell power systems and fuel cartridges that are wearable or easily carried by hand, providing direct current outputs that do not exceed 60 V DC and power outputs that do not exceed 240 VA. Portable fuel cell power systems that provide output levels that exceed these electrical limits are covered by IEC 62282-5-100. b) Externally accessible circuitry is therefore considered to be ES1 energy source as defined in IEC 62368-1, and as limited power source if further compliance with IEC 62368-1:2023, Annex Q is demonstrated. Micro fuel cell power systems that have internal circuitry exceeding 60 V DC or 240 VA are addressed with the separate criteria of IEC 62368-1. c) This document covers micro fuel cell power systems and fuel cartridges. This document establishes the requirements for micro fuel cell power systems and fuel cartridges to ensure a reasonable degree of safety for normal use, reasonably foreseeable misuse, and cargo and consumer transportation and storage of such items. Fuel cartridges refilled by the manufacturer or by trained technicians are covered by this document. The fuel cartridges covered by this document are not intended to be refilled by the consumer. d) Micro fuel cell power systems and fuel cartridges that are covered by this document are not intended for use in hazardous areas as defined by IEV 426-03-01. 1.2 Fuels and technologies covered a) A micro fuel cell power system block diagram is shown in Figure 1. b) This document, including all annexes, apply to micro fuel cell power systems and fuel cartridges as defined in 1.1 above. c) Clause 4 to Clause 8 cover the general safety requirements for all micro fuel cell power systems. IEC 62282-6-101 together with the appropriate technology specific parts shown in Table 1 cover the requirements for the specific technologies in the IEC 62282-6-1XX series. Table 1 – Technology specific parts Specific technology supplement standard Title IEC 62282-6-106 Fuel cell technologies – Part 6-106: Micro fuel cell power systems – Safety – Indirect Class 8 (corrosive) compounds IEC 62282-6-107 Fuel cell technologies – Part 6-107: Micro fuel cell power sy

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62282-6-101-2024 PDF

IEC 62282-6-101-2024 PDF

$211.22 $422.43