Digital addressable lighting interface – Part 105: Particular requirements for control gear and control devices – Firmware transfer
Introduction: IEC 62386 contains several parts, referred to as a series. The IEC 62386 series specifies a bus system for control by digital signals of electronic lighting equipment. The IEC 62386-1xx series includes the basic specifications. IEC 62386-101 contains general requirements for system components, IEC 62386-102 extends this information with general requirements for control gear and IEC 62386-103 extends it further with general requirements for control devices. IEC 62386-104 and IEC 62386-105 can be applied to control gear or control devices. IEC 62386-104 gives requirements for wireless and alternative wired system components. IEC 62386-105 describes firmware transfer. IEC 62386-150 gives requirements for an auxiliary power supply which can be stand-alone, or built into control gear or control devices. The IEC 62386-2xx series extends the general requirements for control gear with lamp specific extensions (mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific features. The IEC 62386-3xx series extends the general requirements for control devices with input device specific extensions describing the instance types as well as some common features that can be combined with multiple instance types. This second edition of IEC 62386-105 is intended to be used in conjunction with IEC 62386-101, IEC 62386-102 and the various parts that make up the IEC 62386-2xx series for control gear, together with IEC 62386-103 and the various parts that make up t
Scope: This part of IEC 62386 applies to control gear and control devices for control by digital signals of electronic lighting equipment. Typically, a bus unit according to the IEC 62386 series contains firmware. There are circumstances where it can be necessary to change the firmware after production or shipping of the product, for example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless, the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system be considered in detail. NOTE Annex D provides a "Firmware update management check sheet" to support risk estimation.
Contents:
- FOREWORD
- INTRODUCTION
- Scope