IEC 62912-2-2019 PDF

IEC 62912-2-2019 PDF

Railway applications-Direct current signalling monostable relays-Part 2: Spring type relays

$100.88 $201.76 -50%
Product Code: IEC 62912-2
Stock In Stock
Edition: 1.0
Published: 08/2019
Number of Pages: 28
File Size: 1 file, 1 Byte

Available Options

Product Description

Railway applications – Direct current signalling monostable relays – Part 2: Spring type relays

Introduction: This document gives a set of generic and specific requirements for non-proved direct current signalling relays of the spring type. This document introduces a set of recommendations and requirements for signalling relay characteristics, construction, magnetic system, contacts and insulation. Requirements are coordinated with current International Standards on all-or-nothing relays. This document is in addition to IEC 62912:2015. IEC 62912-2 describes the non-proved spring type relay. All signalling relays are expected to fulfil the requirements of IEC 62425:2007 and their characteristics are given by IEC 62425:2007, Annex C.7.22 which lists two types of physical properties to provide return forces for stability. Of these properties IEC 62912-2 considers only relays with a spring return force alone. Meeting all the requirements in IEC 62912-2 is sufficient to ensure that further compliance to IEC 62425:2007 need not be evaluated. IEC 62912-2 has been developed as a standard independent from IEC 62912:2015. It uses the same structure as IEC 62912:2015. IEC 62912-2 does not refer to the IEC 61810 series because the relays defined in it are exclusively used in the signalling system, unlike the electromagnetic type elementary relays defined by IEC 61810.

Scope: This document gives requirements for direct current relays intended for safety-related applications in railway signalling installations. This document is applicable to non-proved signalling monostable relays of the spring type, whose return force is generated by elasticity of spring. The return force can be provided either from a separate spring and/or from the contact springs themselves. NOTE “Non-proved” means the feature of relays fulfilling all the safety conditions without the aid of other relays or without control of operations in the circuit.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62912-2-2019 PDF

IEC 62912-2-2019 PDF

$100.88 $201.76