IEC 62977-3-5-2023 PDF

IEC 62977-3-5-2023 PDF

Electronic displays-Part 3-5: Evaluation of optical performance-Colour capabilities

$208.70 $417.39 -50%
Product Code: IEC 62977-3-5
Stock In Stock
Edition: 1.0
Published: 09/2023
Number of Pages: 69
File Size: 1 file, 4.7 MB

Available Options

Product Description

Electronic displays – Part 3-5: Evaluation of optical performance – Colour capabilities

Introduction: The standards in IEC TC 110 that have been mainly concerned with the measurement and evaluation of electronic displays refer to a set of methods and procedures that are similarly performed at the condition of the display system complying with the standard requirement. This document is intended to describe colour and chromaticity capabilities at the system condition set to the required usage, together with suitable precautions and diagnostics, as a reference for R&D engineers, third party experts and reviewers to avoid miscommunication and duplication of efforts among them. In this document, the methods are available for the verification or test purpose of the display product development or evaluation by the users. The aim of this document is to evaluate the available range of chromaticity and colour. Introduction of the optical measurements of electronic displays (OPTs) is also related to a structure where each kind of optical measurement finds its unambiguous position for identification of similarities to other methods or for clarification of distinctions. This structural classification together with a general taxonomy is supposed to make the process of standards production easier, faster and thus more effective. The basic application comparison with the related documents is summarized in Table 1. The display system means an integrated product with device hardware, firmware or application software, or both. The display system characteristics addressed in this part of IEC 629

Scope: This part of IEC 62977 specifies standard evaluation methods for determining the colour capabilities of electronic display modules and systems with respect to colour accuracy, colour gamut volume, and their intersection with a reference colour space. Also included is evaluation with respect to the chromaticity gamut area. These methods apply to emissive and transmissive direct view displays that render real 2D images on a flat panel or on a curved panel with a local radius of curvature larger than 1 500 mm. This document evaluates the optical characteristics of these displays under darkroom conditions. This document applies to the testing of display performance in response to standard analogue or digital input signals that are not absolute luminance encoded. The input signal is relative RGB without metadata information that codes for real luminance, colour space or colour coordinates. These methods are limited to input signals with typical opto-electronic transfer functions (OETFs) such as defined in IEC 61966-2-1, Recommendation ITU-R BT.601 [18]1, Recommendation ITU-R BT.709, and Recommendation ITU-R BT.2020. The tests in this document are not suitable for use with HDR input signals. NOTE A flat panel or flat panel display is a display with a planar surface that emits light from the surface. The display can consist of light valves modulating a backlight or be self-luminous. Emissive, transmissive, or reflective hybrid displays can be non-planar panel, non-planar panel displays, curved (design) panel, or curved (design) panel displays.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC 62977-3-5-2023 PDF

IEC 62977-3-5-2023 PDF

$208.70 $417.39