IEC TR 61352-2006 PDF

IEC TR 61352-2006 PDF

Mnemonics and Symbols for Integrated Circuits

$100.88 $201.76 -50%
Product Code: IEC TR 61352
Stock In Stock
Edition: 2.0
Published: 07/2006
Number of Pages: 56
File Size: 1 file, 475 Bytes

Available Options

Product Description

Mnemonics and Symbols for Integrated Circuits

Scope: This Technical Report gives recommendations, mainly to designers and manufacturers of integrated circuits, in order to arrive at symbols for devices with a consistent use of mnemonics and qualifying symbols. It is intended to serve two purposes, namely: for white-box symbols, it gives a review of standardized designations; for gray-box symbols, it is intended to limit the range of possible variations. White-box symbols are symbols in which the functional behaviour of an element is fully described by standardized means; the relevant rules and explanations are to be found in IEC 60617 in the application notes associated with the symbols S01463 … S01730 (A00269 … A00315) for binary logic elements, and with the symbols S01748 … S01806 (A00281, A00296, A00321 … A00330) for analogue elements. Gray-box symbols are symbols in which the functional behaviour of an element, mostly because of its complexity, is (partly) described by other means than those used for white-box symbols, particularly by referring to supporting documentation; the relevant rules and explanations are to be found in IEC 60617 in the application notes associated with the symbols S01731 … S01747 (A00317 … A00319). Where in the following tables the letter W is shown in the second column, this means that the designation concerned may be used in white-box symbols, as well as in gray-box symbols. A letter G in the second column means that the designation concerned may only be used in gray- box symbols, or in white-box symbols between square brackets (e.g. [PDN] as additional information for “power down”). In these tables, the English descriptions appear in the third column and the French in the fourth, because in many cases designations are derived from terms in English. Where the letter m is used, it shall be replaced by the relevant value, identifying number, cycle length, number of bits or sequential number, as each case demands (with the exception of Am for gain adjust). Where m1 × m2 is shown, m1 shall be replaced by the number of words and m2 by the number of bits per word. See symbols S01706 … S01722. – 8 – TR 61352  CEI:2006 Références normatives Les documents de référence suivants sont indispens

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 61352-2006 PDF

IEC TR 61352-2006 PDF

$100.88 $201.76