Safety of machinery – Electro-sensitive protective equipment – Part 4: Particular requirements for equipment using vision based protective devices (VBPD)
Introduction: This technical report provides information related to the design, construction and testing of electro-sensitive protective equipment (ESPE) that employs vision-based protective devices (VBPDs) for the sensing function for the safeguarding of machinery. At the time of writing this technical report, there were no commercial examples of VBPDs on the market. Therefore, to provide an example of a VBPD for the writing of this technical report, the working group used the results of a Japanese research project. The working group understands that the possibilities for VBPDs are much greater than the limited technologies demonstrated by this example. When real systems do arrive, it is believed that some of the basic concepts put forth in this technical report can be used as a guide for the evaluation and testing of those first systems. It is anticipated that the characteristics and requirements for VBPDs will vary significantly depending on the underlying technologies and methodologies employed. Therefore, it is planned that this technical report will be divided into subparts which address the unique requirements of the different types of vision-based devices (for example IEC 61496-4-1 would cover general requirements and IEC 61496-4-2 would cover requirements unique to devices using a passive reference pattern).
Scope: NOTE As an example for the development of this technical report, a VBPD is defined as consisting of a single image-sensing device viewing one two-dimensional image against a passive pattern as the background and where the detection principle is blocking the view of the pattern. Information about the thickness, shape and surface characteristics of the object is not required for detection. A passive pattern is not created by a light source. Replacement: This part of IEC 61496 specifies requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety-related system, employing vision-based protective devices (VBPDs) for the sensing function. Special attention is directed to features which ensure that an appropriate safety- related performance is achieved. An ESPE may include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1 and this technical report. This technical report does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. It is limited to automatic vision-based ESPEs that do not require human intervention for detection. It is limited to automatic vision-based ESPEs that detect objects entering into, or present in, a detection zone(s). Excluded from this part are VBPD employing radiation at wavelengths outside the range 400 nm to 1 500 nm. This technical report does not address those aspects required for complex classification or differentiation of the object detected. This technical report may be relevant to applications other than those for the protection of persons, for example the protection of machinery or products from mechanical damage. In those applications, additional requirements may be necessary, for example when the materials that are to be recognized by the sensing function have different properties from those of persons. This technical report does not deal with EMC em
Contents:
- FOREWORD
- INTRODUCTION
- Scope