IEC TR 62469-2007 PDF

IEC TR 62469-2007 PDF

Guidance for residual stress measurement of optical fibre

$50.44 $100.88 -50%
Product Code: IEC TR 62469
Stock In Stock
Edition: 1.0
Published: 08/2007
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Guidance for residual stress measurement of optical fibre

Scope: The measurement of residual stress distribution in an uncoated glass optical fibre is considered to be important as it affects critical fibre parameters such as refractive index, intrinsic polarization mode dispersion, mode field diameter and dispersion. The optical polarimetric method is a well-established technique to measure the residual stress of an optical material. This technical report describes a transverse polarimetric method to measure the residual stress profile of any type of optical fibre. The principle and detailed procedure for measuring the optical transverse stress profile of a fibre, which is cylindrically symmetric, is described in detail. It is based on a polariscope, which is constructed with a fixed polarizer, a quarter-wave plate and an analyzer. An optical tomographic technique is also described for measuring the stress profile of a fibre with a cylindrically non-symmetric structure. Justification of measurement Residual stress in an optical fibre is induced by the combination of the fibre construction and the drawing process. The stress information is important because it affects many important parameters of an optical fibre due to the following reasons. Temperature dependent changes of fibre parameters are larger for a fibre with larger residual stress, and these are responsible for the statistical behaviour of polarization mode dispersion (PMD) changes in deployed fibre links. (See references [10-12].)1) The variation of important fibre parameters such as chromatic dispersion, mode field diameter, PMD depends on the intrinsic residual stress of an optical fibre. (See references [13-17].) The asymmetric residual stress profile of a fibre causes fibre curl, which affects cleaving quality for an optical fibre ribbon. The asymmetric residual stress of a fibre is a major cause of the intrinsic PMD of an optical fibre. (See references [18-20].) Excessive residual stress can lead to core cracking that might be seen in, for example, the preparation of the ends for connectors. The design of polarization retaining fibres normally involves inducing a non-symmetric stress field. This measurement can be used to confirm these designs. Much progress

Contents:

  • FOREWORD
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TR 62469-2007 PDF

IEC TR 62469-2007 PDF

$50.44 $100.88