Nanomanufacturing – Key Control Characteristics – Part 8-3: Nano-enabled metal-oxide interfacial devices – Analogue resistance change and resistance fluctuation: Electrical resistance measurement
Introduction: Nano-enabled metal-oxide interfaces, such as an oxide nanolayer sandwiched by metal electrodes, are the essential components of IoT devices for computing. Nano-enabled functions derived from the nanoscale metal-oxide interface and the oxide nanolayer appear, such as a significant change in electrical resistance. The analogue resistance change is the typical characteristic which possesses the large potential for non-von Neumann information processing. More concretely, the metal-oxide interfacial device is an indispensable element in the product- sum circuit that records the learning process as the analogue resistance change. In the research community, however, the analogue change and the fluctuation of the resistance have not yet been systematically investigated. The reason why systematic research and development is not progressing is that the measurement protocol of these characteristics is not quantitative. The bottleneck impedes not only the electrotechnical evaluation of the device but also developments for various applications. This document offers a measurement protocol of the analogue resistance change and the quantitative index to evaluate the linearity of the analogue resistance change in nano-enabled metal-oxide interfacial devices.
Scope: This part of IEC 62607, which is a Technical Specification, specifies a measurement protocol to determine the key control characteristics analogue resistance change, and resistance fluctuation for nano-enabled metal-oxide interfacial devices by electrical resistance measurement. Analogue resistance change as a function of applied voltage pulse is measured in metal-oxide interfacial devices. The linearity in the relationship of the variation of conductance and the pulse number is evaluated using the parameter fitting. The parameter of the resistance fluctuation is simultaneously computed in the fitting process. This method is applicable for evaluating computing devices composed of the metal-oxide interfacial device, for example, product-sum circuits, which record the learning process as the analogue resistance change.
Contents:
- FOREWORD
- INTRODUCTION
- Scope