IEC TS 62610-1-2009 PDF

IEC TS 62610-1-2009 PDF

Mechanical structures for electronic equipment-Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series-Part 1: Design guide: Interface dimension and provision for thermoelectrical cooling systems (Peltier effect)

$100.88 $201.76 -50%
Product Code: IEC TS 62610-1
Stock In Stock
Edition: 1.0
Published: 09/2009
Number of Pages: 28
File Size: 1 file, 3 Bytes

Available Options

Product Description

Mechanical structures for electronic equipment – Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series – Part 1: Design guide: Interface dimension and provision for thermoelectrical cooling systems (Peltier effect)

Introduction: According to the Kyoto Protocol and to the directives of the European Parliament and of the Council, the usage of coolants with high potential for environmental pollution and global warming (Global Warming Potential (GWP) factor) is to be avoided. The most promising alternatives to compressor cooling with e.g. R 134a are compressor cooling with CO2, active cooling based on the Peltier effect and absorption cooling systems. Each of these techniques has its advantages and disadvantages. The compressor cooling with CO2 at the current state is more or less efficient, but high installation costs due to working pressures up to 100 bars makes this technique less interesting. Another disadvantage of CO2 cooling systems occurs out of the physical properties of this coolant and requires additional cooling power to run this process. This fact reduces the degree of efficiency enormously. The Peltier-effect seems to be very promising as the cooling effect is highly dependent of the properties of the material. Newly tested materials based on either porous materials or nano- structures show an improvement of the degree of efficiency. Furthermore, Peltier techniques do not need any kind of coolant and the only moving parts are the fans. The absorption technique is a very intelligent way for cooling, but it is only profitable in combination with a heat-regenerator what makes absorption cooling system only feasible in very few applications. For more details on mentioned alternatives for coolin

Scope: This Technical Specification provides guidelines for the installation of thermoelectrical cooling systems (Peltier effect) within cabinets of the IEC 60297 (19 inch) and IEC 60917 (25 mm) series. The cooling performance is in direct relation with the mounting location within a cabinet. Three typical mounting locations are identified: – mounting location 1: cabinet with inside or outside mounted thermoelectrical cooling system for the cooling of a whole cabinet; – mounting location 2: cabinet with top mounted thermoelectrical cooling system for the cooling of a whole cabinet; – mounting location 3: cabinet with inbuilt thermoelectrical cooling system in form of a subrack for hot spot cooling.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62610-1-2009 PDF

IEC TS 62610-1-2009 PDF

$100.88 $201.76