IEC TS 62647-22-2013 PDF

IEC TS 62647-22-2013 PDF

Process management for avionics-Aerospace and defence electronic systems containing lead-free solder-Part 22: Technical guidelines

$239.59 $479.18 -50%
Product Code: IEC TS 62647-22
Stock In Stock
Edition: 1.0
Published: 09/2013
Number of Pages: 74
File Size: 1 file, 717 Bytes

Available Options

Product Description

Process management for avionics – Aerospace and defence electronic systems containing lead-free solder – Part 22: Technical guidelines

Introduction: 0.1 General The global transition to lead-free (Pb-free) electronics impacts the aerospace, defence, and high performance (ADHP) industry and other industries having high reliability applications in various ways. 0.2 Transition to Pb-free In addition to the perceived need to replace the tin-lead solders used as an interconnect medium in electronic and electrical systems, the following variations to established practice will need to be considered: components and printed circuit boards (PCBs)/printed wiring boards (PWBs) will need to be able to withstand higher manufacturing process temperatures; printed circuit boards (PCBs)/printed wiring boards (PWBs) will need to have robust solderable lead-free (Pb-free) surface finishes; manufacturing and inspection techniques are needed that yield repeatable reliability characteristics; at least initially, Pb-free alloys used within the equipment should be restricted to those that are compatible with tin-lead soldering systems; a maintenance strategy should be developed that will facilitate the support repair of new and existing equipment throughout a long life time which can be higher than 20 years. This document will establish guidelines for the use of Pb-free solder and mixed tin-lead/lead- free alloy systems while maintaining the high reliability standards required for aerospace electronic and electrical systems. Currently the largest volume of lead (Pb) in many of these electronic systems is in the tin-lead eutectic (Sn-37Pb) and ne

Scope: This part of IEC 62647 is intended for use as technical guidance by aerospace, defence, and high performance (ADHP) electronic applications and systems suppliers, e.g., original equipment manufacturers (OEMs) and system maintenance facilities, in developing and implementing designs and processes to ensure the continued performance, quality, reliability, safety, airworthiness, configuration control, affordability, maintainability, and supportability of high performance aerospace systems (subsequently referred to as ADHP) both during and after the transition to Pb-free electronics. The guidelines may be used by the OEMs and maintenance facilities to implement the methodologies they use to ensure the performance, reliability, airworthiness, safety, and certifiability of their products, in accordance with IEC/TS 62647-1:2012. This document also contains lessons learned from previous experience with Pb-free aerospace electronic systems. The lessons learned give specific references to solder alloys and other materials, and their expected applicability to various operating environmental conditions. The lessons learned are intended for guidance only; they are not guarantees of success in any given application. This document may be used by other high-performance and high-reliability industries, at their discretion.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEC TS 62647-22-2013 PDF

IEC TS 62647-22-2013 PDF

$239.59 $479.18