Composite insulators with integrated optical fibres for AC voltages greater than 1 000 V and DC voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
Introduction: Composite insulators with integrated optical fibres, herein after referred to as "fibre optic composite insulators", consist of an insulating tube or core, bearing the mechanical load and protected by a polymeric housing. In addition, optical fibres (fibre optic elements) are incorporated into the insulator to transfer electromagnetic waves (e.g. light), energy, data (information), or other types of signals. Despite these common features, the materials used, and the design details employed by different manufacturers may differ. The mechanical load is transmitted to the core by metallic end fittings. When implementing a fibre optic element within the insulator, the electrical integrity of the element needs to be ensured by the manufacturer and it will not be tested and verified within this document in lifetime aspects. This document considers three design principles: Implementation of the fibre optic element into the polymeric housing, Implementation of the fibre optic element into the load-bearing core, or Implementation of the fibre optic element into the inner volume of a hollow core. The grouping of the tests in this document follows the structure of IEC 62217 and the product standards. It provides additions and modifications to design-, type-, sample and routine tests to be considered when optical elements are incorporated into the respective fibre optic product. Fibre optic composite insulators need to take into consideration the specific product application or standards
Scope: This Technical Specification applies to composite insulators equipped with optical fibres (fibre optic element), consisting of a load-bearing insulating core or tube, a housing (surrounding the insulating core) made of polymeric material, a fibre optic element integrated into the core or housing, or embedded in a filling media inside the inner volume of a hollow core, and end fittings permanently attached to the insulating core. The object of this document is to define the terms used, specify additional test methods and provide additions and modifications to tests referred, specify acceptance criteria. This document is to be used in addition to the respective product standard applicable to the product, application and design to which the fibre optic element has been added. Furthermore, this document does not include requirements dealing with the choice of insulators for specific operating conditions or environments.
Contents:
- FOREWORD
- INTRODUCTION
- Scope