IEEE C62.42.0-2016 PDF

IEEE C62.42.0-2016 PDF

IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports--Overview

$44.00 $88.00 -50%
isbn 9781504436854
Product Code: IEEE C62.42.0
Stock In Stock
Published: 09/30/2017
Number of Pages: 65
File Size: 1 file, 2.7 MB

Available Options

Product Description

IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports--Overview

Introduction: This introduction is not part of IEEE Std C62.42.0™-2016, IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports—Overview. External electrical events, such as lightning, can couple into a system by the mechanisms of direct coupling, electric fields, magnetic fields, and electromagnetic fields. Depending on the coupling mechanism, the coupling level can be reduced by the use of equipotential bonding, isolation, and shielding. Once the surge is in the system it can be further mitigated by the use of surge-protective components in surge-protective devices and the equipment ports. The surge appearing in the system may be a voltage wave or a current wave or both. At a given location the surge may be common-mode or differential-mode or a combination of both. The choice of protection configuration and components will depend on the type of expected surge and the system parameters. Surge- protection component functions are either non-linear limiting or linear attenuating. Both types of protective functions can be used together to achieve the optimum surge mitigation. For example, an isolation transformer could be used to provide a galvanic break and common-mode voltage surge mitigation together with non-linear voltage limiters connected across the transformer windings to provide differential-mode voltage surge mitigation. Clause 3 of this document describes the different terms used in protection engineering. Clause 4 describes the

Contents:

  • 2.1 Definitions
  • 2.2 Acronyms and abbreviations
  • 4.1 Non-linear protective functions
  • 4.2 Linear suppression functions
  • 5.1 Surge mitigation functions
  • 5.2 Non-linear limiting
  • 5.3 Linear suppression
  • 6.1 Signal SPD
  • 6.2 Power over Ethernet port protection
  • 6.3 Subscriber line interface circuit (SLIC) supply voltage tracking voltage limiter
  • 6.4 AC surge protection
  • 6.5 Thermally protected MOVs for ac mains
  • 6.6 Ethernet transceiver (PHY) overvoltage protection
  • 6.7 Equipment ac power port mains filter
  • 6.8 Power line communication port

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
IEEE C62.42.0-2016 PDF

IEEE C62.42.0-2016 PDF

$44.00 $88.00