ISO 20064-2019 PDF

ISO 20064-2019 PDF

Metallic materials - Steel - Method of test for the determination of brittle crack arrest toughness, Kca

$129.00 $258.00 -50%
Product Code: ISO 20064
Stock In Stock
Edition: 1ST
Published: 07/2019
Number of Pages: 52
File Size: 1 file, 6 Bytes

Available Options

Product Description

Metallic materials - Steel - Method of test for the determination of brittle crack arrest toughness, Kca

Introduction: This document provides a test method for determining the crack arrest toughness of steels. Experimental methods of crack propagation and arrest are documented in Reference [1] Among these, ASTM E1221[2] is a test method to evaluate lower bound crack arrest toughness, KIa, under plane strain conditions. On the other hand, crack arrest testing methods using wide plates were developed in the 1950s[3] and have been used for assessing the crack arrest capabilities of cryogenic tanks[3] and pressure vessels[4][5][6]. In recent years, these methods have been extensively used for evaluating the crack arrest toughness of ship steels[7]. The wide plate crack arrest test is intended to evaluate the arrest toughness, Kca, of steel plate at its thickness of actual use and not the lower bound arrest toughness, KIa. However, the relationship between the two arrest toughness values has been investigated[4][6]. It was shown that KIa and Kca values agreed at lower bound of Kca. Moreover, the wide plate crack arrest tests were shown to evaluate the arrest toughness at a higher temperature range at which KIa evaluation is impossible. The theoretical background of crack arrest toughness testing with a temperature gradient is described in References [8] and [9]. This document provides a test method for the determination of brittle crack arrest toughness of steel by using wide plates with a temperature gradient. The test method can be summarized as follows: after setting a temperature gradient acro

Scope: This document specifies a test method for the determination of brittle crack arrest toughness. It is applicable to ferritic steel base metals exhibiting ductile to brittle transition behaviour. Applicable materials are rolled steel plates. It is intended for materials with a tensile strength of 950 MPa or less and a test piece thickness of 200 mm or less. The range of arrest temperatures is between −196 °C and +100 °C. This document can be applied to flat rolled steel plates but not to flattened steel pipes because the flattening can cause changes in arrest toughness.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20064-2019 PDF

ISO 20064-2019 PDF

$129.00 $258.00