ISO 20138-2-2019 PDF

ISO 20138-2-2019 PDF

Railway applications-Calculation of braking performance (stopping, slowing and stationary braking)-Part 2: General algorithms utilizing step by step calculation

$113.50 $227.00 -50%
Product Code: ISO 20138-2
Stock In Stock
Edition: 1.
Published: 11/2019
Number of Pages: 40
File Size: 1 file, 2 Bytes

Available Options

Product Description

Railway applications — Calculation of braking performance (stopping, slowing and stationary braking) — Part 2: General algorithms utilizing step by step calculation

Introduction: This document describes methodologies for calculation of braking performance such as stopping distance, deceleration, power and energy for railway rolling stock. The objective of this document is to enable the railway industry and operators to work with common calculation methods. The ISO 20138 series consists of two parts (ISO 20138-1 and this document) which complement each other. This document describes the step by step calculation methods for railway applications applicable to all countries. In addition, the algorithms provide a means of comparing the results of other braking performance calculation methods. The methodology of step by step calculation is based on numerical time integration. The step by step calculation method cannot be used for stationary braking. This document considers an example for stationary braking of a multiple unit in accordance with ISO 20138-1. When calculating stopping and slowing distances using the step by step calculation method, it is intended that both ISO 20138-1 and this document be considered. © ISO 2019 – All rights reserved

Scope: This document specifies the methodologies for calculation of braking performance for railway rolling stock. This document describes the general algorithms/formulae using instantaneous value inputs to perform calculations of brake equipment and braking performance, in terms of stopping/slowing distances, braking power and energy for all types of rolling stock, either as vehicles or units. The calculations can be performed at any stage of the assessment process (design, manufacture, testing, verification, investigation, etc.) of railway rolling stock. This document does not set out specific acceptance criteria (pass/fail). This document is not intended to be used as a design guide for the selection of brake systems and does not specify performance requirements. This document does not provide a method to calculate the extension of stopping distances when the level of demanded adhesion exceeds the available adhesion (wheel slide activity). This document contains examples of the calculation of brake forces for different brake equipment types and examples of the calculation of stopping distance for vehicles or units.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20138-2-2019 PDF

ISO 20138-2-2019 PDF

$113.50 $227.00