ISO 20270-2019 PDF

ISO 20270-2019 PDF

Acoustics-Characterization of sources of structure-borne sound and vibration-Indirect measurement of blocked forces

$129.00 $258.00 -50%
Product Code: ISO 20270
Stock In Stock
Edition: 1ST
Published: 11/2019
Number of Pages: 46
File Size: 1 file, 5 Bytes

Available Options

Product Description

Acoustics — Characterization of sources of structure-borne sound and vibration — Indirect measurement of blocked forces

Introduction: This document has been developed in response to demand from mechanical industries for an agreed method of specifying the "source strength" of sources of structure-borne sound and vibration. Quantities which independently characterize a source are the free velocity and blocked force: ISO 9611[2] specifies a measurement procedure for the former in which the machine, a vibration source, is mounted on soft mounts to approximate free suspension. The blocked forces are the forces the operating machine would exert when constrained by a perfectly rigid foundation. They can potentially be measured directly by inserting force transducers in between the operating machine and a rigid foundation. However, this document describes an indirect method for measurement of blocked forces using an inverse method. Whereas the measurement of free velocity requires the source to be resiliently mounted and direct measurement of blocked forces requires the machine mounts to be blocked, the indirect measurement, as defined in this document, can theoretically be carried out with the source attached to any receiver structure. Essentially the same measurement techniques are used in the diagnosis of structure-borne sound using "transfer path analysis" (TPA), also called "source path contribution" analysis (SPC). A method of characterizing sources of structure-borne sound and vibration by the indirect measurement of blocked forces at the points of connection to supporting, or receiver, structures is describ

Scope: This document specifies a method where a vibrating component (a source of structure-borne sound or vibration) is attached to a passive structure (or receiver) and is the cause of vibration in, or structure- borne sound radiation from, the assembly. Examples are pumps installed in ships, servo motors in vehicles or machines and plant in buildings. Almost any vibrating component can be considered as a source in this context. Due to the need to measure vibration at all contact degrees of freedom (DOFs) (connections between the source and receiver), this document can only be applied to assemblies for which such measurement is possible. This document is applicable only to assemblies whose frequency response functions (FRFs) are linear and time invariant. The source can be installed into a real assembly or attached to a specially designed test stand (as described in 5.2). The standard method has been validated for stationary signals such that the results can be presented in the frequency domain. However, the method is not restricted to stationary signals: with appropriate data processing, it is also applicable to time-varying signals such as transients and shocks (provided linearity and time invariance of the FRFs are preserved). This document provides a method for measurement and presentation of blocked forces, together with guidelines for minimizing uncertainty. It provides a method evaluating the quality of the results through an on-board validation procedure but does not comment on the acceptability or otherwise of the results.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 20270-2019 PDF

ISO 20270-2019 PDF

$129.00 $258.00